In this section, we will learn how to add a lug-type wafer butterfly valve, where the valve body has threaded holes that are drilled to a manufacturer-specific depth for cap screws.
Add records for lug-type wafer butterfly valve and cap screws in specification CC150-1 as shown below:
Item |
Size |
Commodity Code |
Description |
---|---|---|---|
Butterfly Valve |
6” –8” |
VYLAAXDRTBACD1A1AAMZ |
BFYLUG, Gen manu, CL150, RFTBEHT, Drive, gear operator, ASTM A216-WCB, AISI 316 Trim, RTFE Seat |
Cap Screws |
6” –8” |
LCSAZZAX5ZZZZ |
Cap Screws, ASME-B16.5, ASTM A193 Grade B8 Class 2 (UNS S30400) |
-
Open Spec Editor, click Components tab and create a new specification item for butterfly valve as shown below:
-
Create a new specification item for cap screw as shown below:
-
Build idents of Butterfly Valve "VYLAAXDRTBACD1A1AAMZ".
-
Save the records and lock the grid.
Create mapping of attributes required in PipingCommodityMatlControlData (PCMCD) sheet.
-
Go to Integration > Smart3D > Smart3D Configuration.
-
Go to Attribute Mappings tab and double-click TRAINING_ITEM_MAPPING.
-
Click Edit Grid and create the following records:
-
Similarly, create the mapping for the BoltType attribute in BoltPartData sheet.
-
Save the changes and click Read-Only button.
Creating GasketSelectionFilter Records
-
Go to Integration > Smart3D > Smart3D Configuration.
-
Go to Templates tab, expand TRAINING_TEMPLATE and select the GasketSelectionFilter worksheet.
-
Click the Filter button in the grid view and key in the following details. This will filter out the gasket selection entries for CC150-1.
-
Click Edit Grid and enter the following details.
-
Save the changes and click Read-Only button.
-
Go to Integration > Smart 3D > Smart 3D Transfer Jobs.
-
Create a new run of the export job CC150-1, click on "Open for edit" and add Verification Set VSET1.
-
Save and start the job.