Place a support on a pipe - Intergraph Spoolgen - Help

Intergraph Spoolgen Help

Language
English
Product
Intergraph Spoolgen
Search by Category
Help
SmartPlant Foundation / SDx Version
10
I-Configure Version
6.0(2016)
Isogen Version
13.0(2016)
Smart Isometrics Version
7.2
Spoolgen Version
9.2
  1. Click Place Support Place Support on the Place toolbar. Alternatively, click Add > Support.

    The Selection ribbon displays.

  2. Click Item Code on the Selection ribbon.

    The Select New Material dialog box displays.

  3. Select the item code for the type of support to place, and then click OK.

    The selection bar updates to show the description for the selected support type.

  4. On the Selection ribbon, select the direction in the Direction list.

  5. Position the support on the pipe.

    The icon changes to Flag icon, indicating that a reference point is required. As you position the support within the pipe, you must specify a reference point to define its position.

    Support on Pipe Point 1

  6. Select a point on the pipe to define a reference point. In the example, the center of an elbow is defined as the reference point.

    Support on Pipie Point 2

  7. Type the distance from the reference point to the support in the Distance box, and then click OK Accept on the Selection ribbon.

    Support on Pipe Final

To view the support as it will appear in the generated drawing, click Update Current View Update Current View.

Support on Pipe Update View