Any of the attributes listed below may display in the Properties window when you select a spool in the Pipeline Explorer or using the Select Spool command.
-
For more information about the Select Spool command, see Selection techniques.
-
The spool attributes that display in the Properties window and the ability to edit those attributes is controlled by I-Configure. See Project Defaults and Attributes in the I-Configure Help
Centreline Length
Displays the calculated length of the spool. By default, this information is read-only.
Centre of Gravity X
Displays the calculated center-of-gravity at the X position. By default, this information is read-only.
Centre of Gravity Y
Displays the calculated center-of-gravity at the Y position. By default, this information is read-only.
Centre of Gravity Z
Displays the calculated center-of-gravity at the Z position. This information is read-only.
Factor Diameter
Displays the work erection factor that can be output to the spool information file. This information is read-only.
Identifier
Specifies a unique user-defined identifier for the spool.
Service Commodity Code
Specifies the fluid code (or similar) that Isogen can extract from the pipeline reference or read from the external data field.
Spool Attribute 1-10
Provides for up to 10 user-specified general purpose attributes for the selected spool. You can list the attributes against any component in the spool.
Spool Drawing Number
Specifies a text string used to identify, track, or control each individual drawing without using the pipeline reference or spool number identification. Only used on spool isometrics.
Surface Area
Displays the measurement of the pipe spool's surface area. The value is based on the actual pipe O/D and the accumulated length of the pipeline. Assists in determining paint quantity, costs, and so on. This information is read-only.
Weight
Specifies the weight of the selected spool.
Weld Diameter
Displays the weld diameter.