Where applicable, each AText description includes its respective default value. If a default value is not specified, the AText is normally left blank.
For each AText, three options are available:
-
<Default> uses the default AText value.
-
<Suppress> suppresses the AText value.
-
<Edit value> modifies the AText value with the user-specified entry.
Weld Box Header 1
Denotes text appearing in line 1 of the fixed-format weld summary. Note that columns 1 and 2 are reserved for weld number and category. The default value is WELD|SHOP|WELD|WELDER|VISUAL|NDT|HARD|S.R.|FAB.QA
|
AText ID: |
-412 |
|
? Value: |
None |
|
$ Supported: |
No |
Weld Box Header 2
Denotes text appearing in line 2 of the fixed-format weld summary. Note that columns 1 and 2 are reserved for weld number and category. The default value is NO|/FLD|PROC| ID |ACCEPT|NO | NO | |ACCEPT.
|
AText ID: |
-413 |
|
? Value: |
None |
|
$ Supported: |
No |
Shop Weld Prefix
Denotes weld category identification Shop. The default value is S.
|
AText ID: |
-414 |
|
? Value: |
None |
|
$ Supported: |
No |
Field Weld Prefix
Denotes weld category identification Field / Erection. The default value is F.
|
AText ID: |
-415 |
|
? Value: |
None |
|
$ Supported: |
No |
Offshore Weld Prefix
Denotes weld category identification Offshore. The default value is O.
|
AText ID: |
-416 |
|
? Value: |
None |
|
$ Supported: |
No |
Butt Weld Identifier
Identifies weld type in the User-Defined Weld Summary for butt welds. The default value is BW.
|
AText ID: |
-417 |
|
? Value: |
None |
|
$ Supported: |
No |
Socket Weld Identifier
Identifies weld type in the the User-Defined Weld Summary for socket welds. The default value is SW.
|
AText ID: |
-418 |
|
? Value: |
None |
|
$ Supported: |
No |
Mitre Weld Identifier
Identifies weld type in the User-Defined Weld Summary for mitre welds. The default value is MW.
|
AText ID: |
-419 |
|
? Value: |
None |
|
$ Supported: |
No |
Lug Weld Identifier
Identifies weld type in the User-Defined Weld Summary for lug welds. The default value is LUG.
|
AText ID: |
-420 |
|
? Value: |
None |
|
$ Supported: |
No |
Slip On Flange Weld Identifier
Identifies weld type in the User-Defined Weld Summary for slip on flange welds. The default value is SOP.
|
AText ID: |
-421 |
|
? Value: |
None |
|
$ Supported: |
No |
Olet Weld Identifier
Identifies weld type in the User-Defined Weld Summary for olet, latrolet, or half coupling welds. The default value is LET.
|
AText ID: |
-423 |
|
? Value: |
None |
|
$ Supported: |
No |
Seal Weld Identifier
Identifies weld type in the User-Defined Weld Summary for seal welds. The default value is SLW.
|
AText ID: |
-424 |
|
? Value: |
None |
|
$ Supported: |
No |
Seam Weld Identifier
Identifies weld type in the User-Defined Weld Summary for seam welds. The default value is SEAM.
|
AText ID: |
-438 |
|
? Value: |
None |
|
$ Supported: |
No |
Field Fit Identifier
Identifies weld type in the User-Defined Weld Summary for field fit welds.
|
AText ID: |
-504 |
|
? Value: |
None |
|
$ Supported: |
No |
RPAD Weld Identifier
Identifies weld type in the User-Defined Weld Summary, for reinforcing weld when a single weld is present. The default value is RPD.
|
AText ID: |
-507 |
|
? Value: |
None |
|
$ Supported: |
No |
RPAD Weld 1 Identifier
Identifies weld type in the User-Defined Weld Summary for reinforcing weld when two welds are present. The default value is LF.
|
AText ID: |
-508 |
|
? Value: |
None |
|
$ Supported: |
No |
RPAD Weld 2 Identifier
Identifies weld type in the User-Defined Weld Summary for second reinforcing weld when two welds are present. The default value is L4.
|
AText ID: |
-509 |
|
? Value: |
None |
|
$ Supported: |
No |
Location Separator
If set, used as a delimiter between the two material list identifiers in the Location column of the weld summary box.
|
AText ID: |
-510 |
|
? Value: |
None |
|
$ Supported: |
No |
RPAD Part Identifier
Denotes a part identifier in the Location column of the operations box when a reinforcement pad has not been included on the material list. The default value is PAD.
|
AText ID: |
-511 |
|
? Value: |
None |
|
$ Supported: |
No |
Tack Weld Label
Plots a distinguishing message that points to a user-positioned tack weld. The default value is TACK WELD.
|
AText ID: |
-512 |
|
? Value: |
None |
|
$ Supported: |
No |
Tack Weld Identifier
Identifies weld type in the User-Defined Weld Summary for tack welds. The default value is TW.
|
AText ID: |
-513 |
|
? Value: |
None |
|
$ Supported: |
No |
RPAD Item Code
Denotes the item code for a reinforcement pad whenever automatic item code generation is requested. The default value is REINFPAD.
|
AText ID: |
-514 |
|
? Value: |
None |
|
$ Supported: |
No |
RPAD Description
Denotes the first part of a description for a reinforcement pad when automatic description generation is requested. The second part of the pad description is the description of the main pipeline tube to which the pad is welded. The default value is REINFORCEMENT PAD FOR @.
|
AText ID: |
-515 |
|
? Value: |
None |
|
$ Supported: |
No |
Trunnion Weld Identifier
Identifies weld type in the User-Defined Weld Summary for trunnion (support) welds. The default value is TRN.
|
AText ID: |
-516 |
|
? Value: |
None |
|
$ Supported: |
No |
Manual Weld Indicator
Used with the WELD-ACTION attribute to identify a manual weld on the operations list. The default value is 5.
|
AText ID: |
-517 |
|
? Value: |
None |
|
$ Supported: |
No |
Automatic Weld Indicator
Used with the WELD-ACTION attribute to identify an automatic weld on the operations list. The default value is 1.
|
AText ID: |
-518 |
|
? Value: |
None |
|
$ Supported: |
No |
Pulled Bend Indicator
Denotes pulled bend identification on the operations list. The default value is EB.
|
AText ID: |
-519 |
|
? Value: |
None |
|
$ Supported: |
No |
Random Length Indicator
Denotes random length identification on the operations list. The default value is RL.
|
AText ID: |
-520 |
|
? Value: |
None |
|
$ Supported: |
No |
Fillet Weld Indicator
Identifies weld type in the User-Defined Weld Summary for fillet (support) welds. The default value is FW.
|
AText ID: |
-521 |
|
? Value: |
None |
|
$ Supported: |
No |
Reinforcement Weld Indicator 1
Denotes an alternative to AText -422 (Set On Branch Weld Identifier) to identify branch connection welds for a reinforced tee or cross.
|
AText ID: |
-522 |
|
? Value: |
None |
|
$ Supported: |
No |
Angled Reinforcement Weld Indicator
Denotes an alternative to AText -422 (Set On Branch Weld Identifier) to identify branch connection welds for an angled (not 90º) reinforced tees.
|
AText ID: |
-523 |
|
? Value: |
None |
|
$ Supported: |
No |
Angled Branch Weld Indicator
Denotes an alternative to AText -422 (Set On Branch Weld Identifier) to identify branch connection welds for an angled (not 90º) reinforced tee or cross.
|
AText ID: |
-524 |
|
? Value: |
None |
|
$ Supported: |
No |
Coupling Weld Indicator
Denotes the weld type identifier of any olet type component with a symbol key of HCSC or HCSW.
|
AText ID: |
-525 |
|
? Value: |
None |
|
$ Supported: |
No |
Angled RPAD Weld 1 Identifier
Denotes the weld type identifier of a reinforcement pad to a main pipeline weld on an angled branch when two extra weld numbers are requested. Used with AText -527 (Angled RPAD Weld 2 Identifier).
|
AText ID: |
-526 |
|
? Value: |
None |
|
$ Supported: |
No |
Angled RPAD Weld 2 Identifier
Denotes the weld type identifier of a reinforcement pad to branch weld on an angled branch when two extra weld numbers are requested. Used with AText -526 (Angled RPAD Weld 1 Identifier).
|
AText ID: |
-527 |
|
? Value: |
None |
|
$ Supported: |
No |
Elbow Trunnion Weld Identifier
Denotes the weld type identifier of a trunnion to elbow / bend connection.
|
AText ID: |
-528 |
|
? Value: |
None |
|
$ Supported: |
No |
90-deg Pipe Trunnion Weld Identifier
Denotes the weld type identifier of a 90º non-reinforced trunnion to the main pipeline weld.
|
AText ID: |
-529 |
|
? Value: |
None |
|
$ Supported: |
No |
Angled Pipe Trunnion Weld Identifier
Denotes the weld type identifier of an angled non-reinforced trunnion to the main pipeline weld.
|
AText ID: |
-530 |
|
? Value: |
None |
|
$ Supported: |
No |
90-deg Reinforced Pipe Trunnion Weld Identifier
Denotes the weld type identifier of a 90º reinforced trunnion to the main pipeline weld.
|
AText ID: |
-531 |
|
? Value: |
None |
|
$ Supported: |
No |
Angled Reinforced Pipe Trunnion Weld Identifier
Denotes the weld type identifier of an angled reinforced trunnion to main pipeline weld.
|
AText ID: |
-532 |
|
? Value: |
None |
|
$ Supported: |
No |
Field Items Indicator
Identifies field items on an erection type isometric when a new style operations box is requested (Option Switch 53, Position 2 set to 2). The default value is FI.
|
AText ID: |
-533 |
|
? Value: |
None |
|
$ Supported: |
No |
Random Length Indicator
Identifies a random length on an erection type isometric when a new style operations box is requested (Option Switch 53, Position 2 set to 2). The default value is RL.
|
AText ID: |
-534 |
|
? Value: |
None |
|
$ Supported: |
No |
Support Indicator
Identifies a pipe support on an erection type isometric when a new style operations box is requested (Option Switch 53, Position 2 set to 2. The default value is SU.
|
AText ID: |
-535 |
|
? Value: |
None |
|
$ Supported: |
No |
Valve Indicator
Identifies a valve on an erection type isometric whenever a new style operations box is requested (Option Switch 53, Position 2 set to 2. The default value is VL.
|
AText ID: |
-536 |
|
? Value: |
None |
|
$ Supported: |
No |