Where applicable, each AText description includes its respective default value. If a default value is not specified, the AText is normally left blank.
For each AText, three options are available:
-
<Default> uses the default AText value.
-
<Suppress> suppresses the AText value.
-
<Edit value> modifies the AText value with the user-specified entry.
Title Block Date
The date is taken from the DATE type record in the pipeline input data file and automatically appended in the required format (UK, EUR, or USA) to the AText. The default value is DATE. Applies only to the fixed material list.
AText ID: |
-250 |
? Value: |
None |
$ Supported: |
No |
Title Block Project
Used in the title block area if the project number is set in a PROJECT-IDENTIFIER type record in the pipeline input data file. The content of this record is appended to the AText to form a composite message. The default value is PROJECT NO. Applies only to the fixed material list.
AText ID: |
-251 |
? Value: |
None |
$ Supported: |
No |
Title Block Batch
Used in the title block area if a batch reference is set in a BATCH type record in the pipeline input data file. The content of this record is appended to the AText to form a composite record. The default value is BATCH REF.Applies only to the fixed material list.
AText ID: |
-252 |
? Value: |
None |
$ Supported: |
No |
Title Block Spec
Used in the title block area is a piping specification is set in a PIPING-SPEC type record in the pipeline input data file. The content of this record is appended to the AText to form a composite record. The default value is PIPING SPEC. Applies only to the fixed material list.
AText ID: |
-253 |
? Value: |
None |
$ Supported: |
No |
Title Block Revision
Used in the title block area if an issue (also known as a revision) identifier is set in a REVISION type record in the pipeline input data file. The content of this record is appended to the AText to form a composite message. The default value is ISS. Applies only to the fixed material list.
AText ID: |
-254 |
? Value: |
None |
$ Supported: |
No |
Spool Drawing Label
Identifies individual spool pieces on a spool isometric drawing. A software-generated spool number is appended to the AText to form a composite message. This AText is not used if a spool prefix (SPOOL-PREFIX type record) or spool identifier (SPOOL-IDENTIFIER type record) is included in the pipeline input data file. The default value is SPL. Applies only to the fixed material list.
AText ID: |
-257 |
? Value: |
None |
$ Supported: |
No |
January
Generates a date record. The default value is JAN. Applies only to the fixed material list.
AText ID: |
-258 |
? Value: |
None |
$ Supported: |
No |
February
Generates a date record. The default value is FEB. Applies only to the fixed material list.
AText ID: |
-259 |
? Value: |
None |
$ Supported: |
No |
March
Generates a date record. The default value is MAR. Applies only to the fixed material list.
AText ID: |
-260 |
? Value: |
None |
$ Supported: |
No |
April
Generates a date record. The default value is APR. Applies only to the fixed material list.
AText ID: |
-261 |
? Value: |
None |
$ Supported: |
No |
May
Generates a date record. The default value is MAY. Applies only to the fixed material list.
AText ID: |
-262 |
? Value: |
None |
$ Supported: |
No |
June
Generates a date record. The default value is JUN. Applies only to the fixed material list.
AText ID: |
-263 |
? Value: |
None |
$ Supported: |
No |
July
Generates a date record. The default value is JUL. Applies only to the fixed material list.
AText ID: |
-264 |
? Value: |
None |
$ Supported: |
No |
August
Generates a date record. The default value is AUG. Applies only to the fixed material list.
AText ID: |
-265 |
? Value: |
None |
$ Supported: |
No |
September
Generates a date record. The default value is SEP. Applies only to the fixed material list.
AText ID: |
-266 |
? Value: |
None |
$ Supported: |
No |
October
Generates a date record. The default value is OCT. Applies only to the fixed material list.
AText ID: |
-267 |
? Value: |
None |
$ Supported: |
No |
November
Generates a date record. The default value is NOV. Applies only to the fixed material list.
AText ID: |
-268 |
? Value: |
None |
$ Supported: |
No |
December
Generates a date record. The default value is DEC. Applies only to the fixed material list.
AText ID: |
-269 |
? Value: |
None |
$ Supported: |
No |
Title Block Insulation Spec
Used in the title block area if an insulation specification identifier is set in an INSULATION-SPEC type record in the pipeline input data file. The content of this record is appended to the AText to form a composite message. The default value is INSULATION SPEC. Applies only to the fixed material list.
AText ID: |
-270 |
? Value: |
None |
$ Supported: |
No |
Title Block Tracing Spec
Used in the title block area if a tracing specification identifier is set in a TRACING-SPEC type record in the pipeline input data file. The content of this record is appended to the AText to form a composite message. The default value is TRACING SPEC. Applies only to the fixed material list.
AText ID: |
-271 |
? Value: |
None |
$ Supported: |
No |
Fab Material Heading
Specifies the category heading under which components required for SHOP Fabrication are listed. The default value is FABRICATION MATERIALS.
AText ID: |
-300 |
? Value: |
None |
$ Supported: |
No |
Part Heading
Specifies the part number heading used in conjunction with AText -302 (Number Heading) to form a composite message. The default value is PT.
AText ID: |
-301 |
? Value: |
None |
$ Supported: |
No |
Number Heading
Used in conjunction with AText -301 (Part Heading) to form a composite message. The default value is NO.
AText ID: |
-302 |
? Value: |
None |
$ Supported: |
No |
Description Heading
Specifies the heading in the material listing under which components are described according to their catalog component description. The default value is COMPONENT DESCRIPTION.
AText ID: |
-303 |
? Value: |
None |
$ Supported: |
No |
Nominal Size Heading
Specifies the heading under which the nominal size of each item is listed. Used in conjunction with AText -330 (NS Inch Indicator) or AText -331 (NS MM Indicator) to form a composite message. The default value is N.S.
AText ID: |
-304 |
? Value: |
None |
$ Supported: |
No |
Item Code Heading
Specifies the heading under which component identification codes are listed. The default value is ITEM-CODE.
AText ID: |
-305 |
? Value: |
None |
$ Supported: |
No |
Quantity Heading
Specifies the heading under which the required quantities are listed. The default value is QTY.
AText ID: |
-306 |
? Value: |
None |
$ Supported: |
No |
Pipe Sub-Heading
Specifies the group sub-header under which pipe is listed. The default value is PIPE.
AText ID: |
-307 |
? Value: |
None |
$ Supported: |
No |
Fittings Sub-Heading
Specifies the group sub-header under which pipe fittings are listed, such as elbows and tees. The default value is FITTINGS.
AText ID: |
-308 |
? Value: |
None |
$ Supported: |
No |
Flanges Sub-Heading
Specifies the group sub-header under which all flanges are listed. The default value is FLANGES.
AText ID: |
-309 |
? Value: |
None |
$ Supported: |
No |
Erection Material Heading
Specifies the category header under which components required for SITE erection, or construction, are listed. The default value is ERECTION MATERIALS.
AText ID: |
-310 |
? Value: |
None |
$ Supported: |
No |
Gaskets Sub-Heading
Specifies the group sub-heading under which all gaskets are listed. The default value is GASKETS.
AText ID: |
-311 |
? Value: |
None |
$ Supported: |
No |
Bolts Sub-Heading
Specifies the group sub-heading under which all bolts are listed. The default value is BOLTS.
AText ID: |
-312 |
? Value: |
None |
$ Supported: |
No |
Valves and Inline Sub-Heading
Specifies the group sub-heading under which all valves and in-line items are listed. The default value is VALVES / IN-LINE ITEMS.
AText ID: |
-313 |
? Value: |
None |
$ Supported: |
No |
Instruments Sub-Heading
Specifies the group sub-heading under which all instruments are listed. The default value is INSTRUMENTS.
AText ID: |
-314 |
? Value: |
None |
$ Supported: |
No |
Supports Sub-Heading
Specifies the group sub-heading under which all supports are listed. The default value is SUPPORTS.
AText ID: |
-315 |
? Value: |
None |
$ Supported: |
No |
Spools Sub-Heading
Specifies the group sub-heading under which all spool numbers are listed. The default value is PIPE SPOOLS.
AText ID: |
-316 |
? Value: |
None |
$ Supported: |
No |
Piping NS Summary Heading
Used in conjunction with AText -318 (Pipe CL Summary Heading) to which the total centerline length per bore is automatically computed and listed. Also uses AText -330 (NS Inch Indicator) or AText -331 (NS MM Indicator) to indicate units. For more information, see Alternative Text in Materials.Text. The default value is PIPE NS.
AText ID: |
-317 |
? Value: |
None |
$ Supported: |
No |
Pipe CL Summary Heading
Used in conjunctions with AText -317 (Pipe NS Summary Heading). Also uses AText -329 (Metre Indicator) or AText -361, depending on the units being used. The default value is CL LENGTH.
AText ID: |
-318 |
? Value: |
None |
$ Supported: |
No |
Cut length Sub-Heading
Specifies the heading under which all the cut pipe lengths are listed. The default value is CUT PIPE LENGTH.
AText ID: |
-319 |
? Value: |
None |
$ Supported: |
No |
Piece Sub-Heading
Specifies the sub-heading to AText -319 (Cut Length Sub-Heading) under which the cut pipe piece numbers are listed. This AText is used in conjunction with AText -321 (Piece No Sub-Heading) to form a composite message. The default value is PIECE.
AText ID: |
-320 |
? Value: |
None |
$ Supported: |
No |
Piece No. Sub-Heading
Used in conjunction with AText -320 (Piece Sub-Heading) to form a composite message. The default value is NO.
AText ID: |
-321 |
? Value: |
None |
$ Supported: |
No |
Cut Sub-Heading
Specifies the sub-heading to AText -319 (Cut Length Sub-Heading) under which the actual cut pipe lengths are listed. This AText is used in conjunction with AText -323 (CutLength Sub-Heading) to form a composite heading. The default value is CUT.
AText ID: |
-322 |
? Value: |
None |
$ Supported: |
No |
CutLength Sub-Heading
Used in conjunction with AText -322 (Cut Sub-Heading) to form a composite message. The default value is LENGTH.
AText ID: |
-323 |
? Value: |
None |
$ Supported: |
No |
Remarks Sub-Heading
Specifies the sub-heading to AText -319 (Cut Length Sub-Heading) under which one of the ATexts -326, -327, -328, or -500, if applicable, is listed. The default value is REMARKS.
AText ID: |
-324 |
? Value: |
None |
$ Supported: |
No |
Spool Number Separator
Specifies a spool number separator on the material list.
AText ID: |
-325 |
? Value: |
None |
$ Supported: |
No |
Spool ID Heading
Indicates a header or column identifier on the following printed output whenever spool identifiers are listed. The default value is SPOOL ID.
-
Printed material list (Fixed or Variable)
-
Printed material control file
-
Printed weld summary
AText ID: |
-503 |
? Value: |
None |
$ Supported: |
No |