Alternative Texts - Isogen - Reference

Isogen Isometric Drawing Options Reference

Language
English
Product
Isogen
Search by Category
Reference
Smart 3D Version
11 (2016)
Isogen Control Panel Version
2.0(2016)
Isogen Version
13.0(2016)

Where applicable, each AText description includes its respective default value. If a default value is not specified, the AText is normally left blank.

For each AText, three options are available:

  • <Default> uses the default AText value.

  • <Suppress> suppresses the AText value.

  • <Edit value> modifies the AText value with the user-specified entry.

Fall Label

Denotes a FALLing (sloped) line. Used in conjunction with the Fall symbol. You can use the ? symbol to determine the format used for outputting the falling line messages. The default value is FALL ?.

AText ID:

-222

? Value:

Slope angle

$ Supported:

Yes

Fall Label (Ratio)

Denotes falling lines specified with a ratio, such as 1:10.

AText ID:

-224

? Value:

None

$ Supported:

No

Fall Label (Percent)

Produces a system-generated percent symbol ( % ) used on falling pipelines specified with a percentage indication.

AText ID:

-225

? Value:

None

$ Supported:

No

Fall Label (Gradient)

Indicates a falling line specified in gradients. The default value is GRAD.

AText ID:

-226

? Value:

None

$ Supported:

No

Fall Label (Metric Incline)

Indicates a falling line specified as an incline in metric units, such as millimeters per meter. The default value is PER M.

AText ID:

-227

Value:

None

$ Supported:

No

Fall Label (Imperial Incline)

Indicates a falling line specified as an incline in imperial units, such as inches per foot. The default value is PER FT.

AText ID:

-228

? Value:

None

$ Supported:

No

Skewed Branch Label

Identifies skewed branches in cases where skew box indication has been suppressed. A software-generated direction is appended to this text to form a complete message. The default value is ORIENTATION DIRECTION.

AText ID:

-287

? Value:

None

$ Supported:

No

Horizontal Label

Distinguishes horizontal skew angles from vertical skew angles on the isometric drawing.

AText ID:

-548

? Value:

Skew angle

$ Supported:

Yes

Vertical Skew Label

Distinguishes vertical skew angles from horizontal skew angles on the isometric drawing.

AText ID:

-549

? Value:

Skew angle

$ Supported:

Yes