Miscellaneous Attributes - Isogen - Reference

Isogen Isometric Drawing Options Reference

Language
English
Product
Isogen
Search by Category
Reference
Smart 3D Version
11 (2016)
Isogen Control Panel Version
2.0(2016)
Isogen Version
13.0(2016)

Lists the attributes that are available to report the specialized information related to some component types.

Double-click an attribute name to add it to the Report Layout area. Alternatively, click Add Attribute . Then use the options in the Report Definition panel to configure the report as needed. For more information, see Define the report layout.

Not all of the attributes listed below are permissible for all report types. As such, the report that is currently active in the Report Definition panel determines which pipeline attributes appear in the attributes list.

Attribute Name

Description

Allowance

Cut-piece allowance for the end of the pipe where it is placed.

Angle

Value of the angle in hundredths of degrees. Angle data is reported for components such as elbow, bend, olet, tee, cross, bend-teed, and elbow-teed type components.

Category

Location where the component is assembled with other components to form a spool or pipeline.

Erection defines the component to be placed or constructed in the field. An erection component also creates a spool break.

Fabrication defines the component to be fabricated in a workshop.

Offshore defines the component to be placed or constructed in the field as part of an offshore operation.

Centre Of Gravity X

Calculated center of gravity at the X position.

Centre Of Gravity Y

Calculated center of gravity at the Y position.

Centre Of Gravity Z

Calculated center of gravity at the Z position.

Centreline Length

Length of the pipeline as derived by the pipe and component coordinates. Used in reports and can be output in a table on the isometric drawing on a per bore basis.

Connection Reference

Connection reference of the of the connected pipeline or equipment item.

Cut Piece Length

Cut piece length of the pipe or bend.

CUT-PIECE-NO

Cross-reference to the cut length identifier that appears along a section of plotted pipe on the isometric drawing to a table on the drawing or a report. This cross-reference can be to a table on the drawing or in a report.

DELIMITER-CHARACTER

Special character used as the delimiter.

Enclosure

Type of enclosure output on the isometric drawing.

END-PREPARATION-1
END-PREPARATION-2

End preparation description, such as bevel, screwed, mitred, butt weld, and so on, used with additional material.

Factor Diameter

Work content erection factor that can be output to the spool information file.

GENERAL-WELD-PREFIX

String that Isogen uses to override the default weld number prefix for the pipeline.

GROUP

Component type group, such as pipe, flange, valve, and so forth.

Highest ID

Highest identifier generated on the previous run of the pipeline.

Highest Number

Highest number generated on the previous run of the pipeline.

Highest Offshore Number

Highest offshore number generated on the previous run of the pipeline.

INFORMATION Attribute 1 to
INFORMATION Attribute 100

User-defined information attribute. Up to 100 attributes can be used for any purpose.

LineStyle

User-specified line style number.

Measurement Points

Number of placement points (Thickness Measurement Location).

Measurement Type

Type of measurement (Thickness Measurement Location).

Message Text

Relevant information related to the error/warning message.

N.S.

Main bore of the component.

N.S. (OUTPUT-UNITS)

Output units for the component bore.

N.S.SEC.

Secondary bore of the component.

N.S.SEC.(MANDATORY)

Indicator to always output the secondary nominal size in the material control file.

N.S.SEC.(OPTIONAL)

Indicator to output the secondary nominal size only on multi-leg components.

N.S.THIRD

Third bore of the component.

NUMBER-OF-DRGS

Number of drawings contained in the plot file.

NUMBER-OF-SPOOLS

Number of spools contains in the plot file.

Part Number

Part number used by Isogen instead of its automatically generated one.

PIPELINE-DATA-FILENAME

File name of the input data file.

PLOTFILE-DATE

Date the plot file was generated by Isogen.

PLOTFILE-NAME

Name of the Isogen-generated plot file.

PT-NO

Item part number.

QTY

Number items to be associated.

Referenced Item

Coordinates that give the direction of the centerline of the referenced item. Mainly used for skewed items.

Referenced Item Direction

Primary direction of the referenced item.

Remark

User-specified comment containing special requirements. Output to the remarks file and plotted on the isometric drawing.

REVISION-IDENTIFIER

Revision of the item.

Sheet Number

Number of the drawing sheet.

SKEY

Isogen symbol key for the component.

Spool Attribute 1 to
Spool Attribute 10

User-defined spool attribute. Up to 10 attributes can be used for any purpose.

Spool Drawing Number

Text string used to identify/track/control each individual drawing. Output only on a spool isometric drawing.

Spool Identifier

Spool identification number.

SPOOL-CL-LENGTH

Value of the spool centerline length.

SPOOL-CL-LENGTH/N.S.

True length of the spool, including any branches. Calculated length includes all flanges, fittings and pipe, including the true length around bends. Output values are given to the nearest 1/10th foot or meter.

SPOOL-COFG

Value of the center of gravity calculation for the spool.

SPOOL-FACTOR-DIA/FT

Spool erection factor output in imperial units.

SPOOL-FACTOR-DIA/MT

Spool erection factor output in mixed or metric units.

SPOOL-NUMBER

Number of the pipe spool.

SPOOL-SURFACE-AREA

Calculated surface area of the pipe spool. Based on the pipe O/D and the accumulated length of the spool being processed.

SPOOL-WEIGHT

Total weight of the pipe spool.

SPOOL-WELDS/DIA/INCH

Summation of weld diameter in inches multiplied by quantity for each spool.

SPOOL-WELDS-DIA/MM

Summation of weld diameter in meters multiplied by quantity for each spool.

Style

Representation of output units (DECIMAL or INCH).

Surface Area

Calculated surface area of the pipeline. Calculation is based on the actual pipe O/D and the accumulated length of the pipeline. Assists in determining paint quantity, costs, and so on.

TAG

User-specified identifier that identifies the component.

Type of Dimension

Dimension type.

Thickness/Rating

Thickness of the weld.

UNIQUE-PT-NO-LIST

Additional part number information output in the material list definition (MLD) file. Supplements or replaces the existing PT-NO field.

UNIQUE-PT-NO-SUFFIX-
LIST

Additional part number information output in the material list definition (MLD) file. Supplements or replaces the existing PT-NO field.

Weight

Weight of the component or the weight per unit length of pipe.

Weld Type

Text identifier on a weld, as distinct from the weld SKEY or from implied end type.

WELD-CAT

Weld category, such as fabrication, shop, or offshore.

Weld Diameter

Units of dimensions (in or mm) used for weld diameter.

WELD-DIAMETERS-PIPE

Pipe weld diameters or pipe weld cost factors on the isometric drawing.

WELD-DIAMETERS-
SUPPORT

Support weld diameters or support weld cost factors on the isometric drawing.

WELD-LOCATION

Trigger to allow the location of each weld on the pipeline to be shown on any generated list.

WELD-NO

Number of the weld.

Weld Number 1 to
Weld Number 9

User-defined weld number. Up to 10 numbers can be defined.

WELD-REM

Text remark associated with a particular weld.