General Cantilever Properties - Intergraph Smart Reference Data Standard Database - Version 12.3 - Help - Hexagon PPM

SDB for SRD Hangers and Supports Help 12.3

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Smart 3D Version
13
Standard Database for Smart Reference Data Version
12.3

IJUAhsSupportNumber::SupportNumber - Defines the support detail number as specified in the support specification. This value is used by the default BOM function when generating the BOM Description for the support.

IJUAhsSteelStandard::SteelStandard - Defines the steel standard used by the support. If there are any external rules for the steel section, this attribute is used to determine standard to use.

IJUAhsFrameType::FrameType - Defines the type of the frame shape. This attribute is used by the rules to determine the support frame type. You can add additional code-List values as required. The accepted values from the hsFrameType codelist in the HS_S3DAssy_Codelist.xls workbook are shown below:

  • 9 - Cantilevers

  • 10 - Braced Cantilevers

IJUAhsFrameOrientation::FrameOrientation - Defines the frame support orientation with respect to the supporting object or the global coordinate system. The accepted values from the hsFrameOrientation codelist in the HS_S3DAssy_Codelist.xls workbook are shown below:

  • 1 - Direct Orientation

  • 2 -Orthogonal Orientation

  • 3 - Tangent Orientation

IJUAhsMirrorFrame::MirrorFrame - Mirrors the frame about the bounding box. The accepted codelist values are shown below:

  • 0 - False

  • 1 - True

IJUAhsIncludeInsulation::IncludeInsulation - Specifies whether the frame should adjust its size to include pipe insulation.

  • 0 - False

  • 1 - True

IJUAhsStructureConn::StructureConnection - Specifies how the hanger beam part is connected to the structure. The accepted codelist values are shown below:

  • 1 - Normal

  • 2 - Lapped

  • 3 - Lapped-Opposite

IJUAhsJointValRl::JointValidationRule - Defines an HgrSupportRule that returns a true or false. It will be used validate the part properties like plate/stiffeners. Parts/supports properties can be set without changing the SDB supports code.