BOM Positions - Intergraph Smart Materials - 10.2 - Training - Hexagon

Smart Materials Web Tutorials

Language
English
Product
Intergraph Smart Materials
Subproduct
Web
Search by Category
Training
Smart Materials/Smart Reference Data Version
10.2

Purpose

This section explains how to manually create BOM (Bill of Materials) positions.

Exercise

  1. Open the Maintain BOM screen from Home > Bill of Materials, and then navigate to the PIPING node in the node tree on the left and expand the entire WBS tree.

  2. Double-click the sheet 01 underneath PIPING > A100 > NF-12004. This node has the path /PIPING/A100/NF-12004/01.

    The software opens the Multi Position View.

  3. Open the Single Material View by clicking on a Position.

  4. Go to Ident Details>Specification Code, and click button .

  5. Select Spec Code 12LB0M01.

  6. Select Short Code PIP.

  7. Select Option Code 1.

  8. Select Size1 and select 3, and save.

    • The Commodity Group, Commodity Part, Commodity Code, and Ident Code were filled automatically after saving.

    • Position 10 was automatically filled in the Pos field corresponding to the project default settings ZB_LPSTART and ZB_LP_INC. The Unit field was set according to the project default ZB_UNIT_ID, the issue status was set in the Status field according to ZB_STAT_ID, and the list status was set in the List Status field according to ZB_LST_ID.

  9. Press Add Row and afterwards the Use Cart button, and the SRD Explorer opens. Click the button to open the Filters for Commodity Group and select P. Afterwards, filter for PP for Commodity Part, and click Apply.

  10. Expand the SRD Explorer, select the Idents, and Add to Cart.

  11. Now select the Idents ā€“ the selected Idents are shown on the right side afterwards.

  12. And, then press the Add button.

  13. The LOV on the Short Code field opens automatically, displaying all the short codes assigned to the selected spec. Select the short code PIP from the list, and click OK.

  14. The LOV on the Option Code field opens automatically, displaying the option codes used in the spec for the selected short code. Select option code 1 from the list, and click OK.

  15. Click into the Size1 field and click the button and select the size1=4/size2=S-STD from the list, and click OK.

    You have entered all necessary information to create a BOM position.

  16. Save the changes.

    Because the project default ZB_COMMIT is set to Y, the storage of the position has automatically triggered the execution of the FIND_IDENT verification. As a result, the ident was found based on the entered spec, short code, option and sizes. With the ident, the Group, Part, Commodity Code, Ident Code, and Ident Nls/Commodity Code Layout Short fields were filled by this procedure.

    The properties INS-TYPE, SF, and COMPONENTTYPE were added to the Position Values tab corresponding to the position properties definition.

  17. Create additional BOM positions in the same way as described above. Here are the details:

    Spec

    Short Code

    Option Code

    Size1

    Size2

    12LB0M01

    CAP

    1

    4

    0

    12LB0M01

    90TEE

    1

    4

    0

    12LB0M01

    VGAT

    1

    4

    0

    12LB0M01

    PIP

    1

    3

    0

    12LB0M01

    CPL

    1

    3

View the result on the Multi Position View tab.

  1. Go to sheet 02 underneath PIPING > A100 > NF-12004. This node has the path /PIPING/A100/NF-12004/02.

    The software opens the Multi Position View tab.

  2. Press Add Row, and Save.

  3. Click on Position and go to tab Ident Details. Open the LOV using the button. The Ident List opens in query mode.

  4. Enter P in the Group field, PP in the Part field, and click Apply.

    The Ident List opens with available Commodity Codes and Idents.

  5. Select .5 in the Size1 field, and S-STD in the Size2, change unit to m, and click .

  6. The selected ident with the associated group, part, commodity code, and ident Nls/commodity code layout are inserted in the BOM position in Maintain BOM.

  7. Click Add Row button to create a new position.

  8. Click into the Group field, and then click the button and select the group B from the list and click OK.

  9. Select the part CAP from the list, and click OK.

    The Ident List opens and displays commodity codes associated to the selected part. Filter for the commodity code BCAPABMBEACK (BCAPABMBEACKABA) from the list and click Save.

  10. The LOV on the Ident Code field opens automatically, displaying all ident codes associated with the selected commodity code. Search for size1 = .5 (4) and size2 = S-30 (S-STD), select this ident code I0396602 (I0396853) from the list.Click OK, and then Save.

    View the result on the Multi Position View tab.