Frame Input Value Properties - Intergraph Smart Reference Data Standard Database - Version 12.0 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help (2020)

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
2020 (12.0)

Attribute Name

Description

Implementation Details

IJUAhsFrameOffset1::

Offset1Value

Specifies the distance that the member should be offset from the pipe. To select the offset value using Offset1Rule, do not type any value for this property.

Defines an HgrSupportRule that returns the offset from the member to the pipe. To select the offset value using Offset1Value, do not type any value for this property

By Rule - 1 – Offset1Rule is used

By Input - 2 – Offset1Value is used.

Specifies how Offset1 should be measured. If you type an unsupported value or do not assign a value, then the software uses the default value that is 1

Use the following definitions:

1 - Inside Steel to Edge of Pipe

rod_hanger5

2 - Center Steel to Edge of Pipe

rod_hanger6

3 - Outside Steel to Edge of Pipe

rod_hanger7

4 - End of Steel to Edge of Pipe

rod_hanger8

IJUAhsFrameOffset1Rl::

Offset1Rule

IJUAhsFrameOffset1Sel::

Offset1Selection

IJUAhsFrameOffset1Def::

Offset1Definition

IJUAhsFrameOffset2::

Offset2Value

Specifies the value of the distance that the second leg should be offset from the pipe.

Defines an HgrSupportRule that returns the offset from the second leg to the pipe. The hanger rule must exist in the catalog; it can be a rule name or a ProgID.

Specifies how the Offset2 should be measured. If you type an unsupported value, or do not assign a value, then the software uses the default value that is 1. For U, T, and Box Frame types, Offset2Definition is same as Offset1Definition.

The following values are allowed:

By Rule - 1 – Offset2Rule is used

By Input - 2 – Offset2Value is used

IJUAhsFrameOffset2Rl::

Offset2Rule

IJUAhsFrameOffset2Def::

Offset2Definition

IJUAhsFrameOffset2Sel::

Offset2Selection

IJUAhsFrameOffset3::

Offset3Value

Specifies the value of the distance that the second leg should be offset from the pipe.

Defines an HgrSupportRule that returns the offset from the second leg to the pipe. The hanger rule must exist in the catalog; it can be a rule name or a ProgID.

Specifies how the Offset3 should be measured. If you type an unsupported value, or do not assign a value, then the software uses the default value that is 1.

The following values are allowed:

By Rule - 1 – Offset3Rule is used

By Input - 2 – Offset3Value is used

Supported values for T-Frame is as follows:

image338

IJUAhsFrameOffset3Rl::

Offset3Rule

IJUAhsFrameOffset3Def::

Offset3Definition

IJUAhsFrameOffset3Sel::

Offset3Selection

IJUAhsFrameShoeHeight::

ShoeHeightValue

Specifies the distance that the main steel member should be offset from the pipe. To determine the shoe height using ShoeHeightRule, do not type any value for this property.

1.Specify the Height value number. Alternatively, specify the part class.

2.Use a HgrRule to obtain the part.Specify the part number. Alternatively, specify the part class

The pipe attachment 1 is an optional part. Leave these attributes blank if you do not want to include a pipe attachment.

IJUAhsFrameShoeHeightRl::

ShoeHeightRule

Defines an HgrSupportRule that returns the shoe height. To determine the shoe height using ShoeHeightValue, do not type any value for this property.

IJUAhsFrameShoeHeightDef::

ShoeHeightDefinition

Specifies how ShoeHeight should be measured. If you type an unsupported value or do not assign any value, then the software uses the default value that is 1.

JUAhsFrameShoeHeightSel::

ShoeHeightSelection

Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select ShoeHeightValue by either input or rule.

By Rule - 1 – Offset1Rule is used

By Input - 2 – Offset1Value is used