Support Attributes - Intergraph Smart Reference Data Standard Database - Version 12.0 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help (2020)

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
2020 (12.0)

The following attributes are used to configure the support:

Attribute Name

Description

Implementation Details

IJUAhsStanchionOffset::
OffsetFromStructure

Specifies the offset from the supporting structure.

IJUAhsStanchionOffsetRl::OffsetFromStructureRl

Specifies a rule to get the ‘OffsetFromStructure’ value.

If you specify a value, the software gets the ‘OffsetFromStructure’ using rule.

IJUAhsGroutThickness::
GroutThickness

Specifies the thickness of the grout.

If GroutThickness is set to zero or is blank, the software uses the thickness from the grout part.

IJUAhsGroutAngl::
GroutAngle

Specifies the angle between the top and bottom edges of grout.

Any value less than 90 degrees is supported.

IJUAhsAnchorBoltX::
AnchorBoltX

Specifies the offset for anchor bolt X.

Use the following definitions:

1 - Offset from the base plate

Grout - Support Attributes - AnchorBoltX

2 - Offset between bolts

Grout - Support Attributes - AnchorBoltX - 2

3 - Offset from the centerline of the base plate

Grout - Support Attributes - AnchorBoltX - 3

IJUAhsAnchorBoltY::
AnchorBoltY

Specifies the offset for anchor bolt Y.

Use the following definitions:

1 - Offset from the base plate

Grout - Support Attributes - AnchorBoltY - 1

2 - Offset between bolts

Grout - Support Attributes - AnchorBoltY - 2

3 - Offset from the centerline of the base plate

Grout - Support Attributes - AnchorBoltY - 3

IJUAhsAnchorBoltZ::
AnchorBoltZ

Specifies the offset for anchor bolt Z.

If a base plate is not included, the software uses the top of the grout for the measurement.

Use the following definitions:

1 - Distance above plate

Grout - Support Attributes - AnchorBoltZ - 1

2 - Distance from the center of plate to the center of the bolt

Grout - Support Attributes - AnchorBoltZ - 2