General Attributes - Intergraph Smart Reference Data Standard Database - Version 12.0 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help (2020)

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
2020 (12.0)

The assemblies in the SDB package use the following general attributes:

Attribute Name

Description

Implementation Details

IJUAhsSupportNumber::
SupportNumber

Specifies the support detail number as defined in the support specification.

The default BOM function uses this value to generate the BOM description for the support.

For example, ABS-01, SH-02, and so on.

IJUAhsSupportOrient::
SupportOrientation

Specifies how the support must be oriented with respect to the supporting object.

The following codelist values from hsSupPipeOrientation of HS_S3DAssy_Codelist workbook are acceptable:

1 - Slope - Support orientates directly with the supporting object.

Direct orientation to planar object

Illustration of Slope Orientation - General Attributes

SDB General Attributes - Slope Orientation

2 - Orthogonal - Support orientates orthogonally with global Z-axis.

Orthogonal orientation to planar object

Illustration of Orthogonal Orientation - General Attributes

SDB General Attributes - Orthogonal Orientation

IJUAhsIncElevCO::
IncludeElevCallout

Specifies whether to include the elevation callout in the support. The callout for the elevation is on a label on the fabrication drawing.

True - include callout

False - exclude callout

IJUAHgrDrawingTemplate::
DrawingTemplate

Specifies the drawing template to use for the support.

IJUAHgrRulePriority::
RulePriority

Sorts the supports returned by the Assembly Selection Rule shown in the Type list.

IJUAhsValidation::
ValidationRule

Specifies the hgrSupportRule that validates the state of the support and raises any custom warnings or errors to the user.

You can customize the validation rules based on the support.

The default ShoeValidationRule provides an example to check the insulation thickness and Limit Stop gaps. If you do not require any validation rule, do not enter any property.

MultiLocate Attributes

IJUAhsMulti1::Multi1Qty

Specifies the quantity of BeamClamps.

Valid Multi1Qty, Multi1LocateBy, Multi1Location cases:

multilocate1

multilocate2

multilocate3

multilocate4

multilocate5

IJUAhsMulti1::Multi1LocateBy

Specifies the location of BeamClamps. Each BeamClamp can be located in two ways:

  1. Relative to center of the group

  2. Relative to Edge.

IJUAhsMulti1::Multi1Location

Specifies the spacing of the location based on the LocateBy attribute.