The following attributes specify the Nut configuration attributes of an Adjustable Base Support:
|
Name |
User Name |
Category |
On Property Page |
Read Only |
|---|---|---|---|---|
|
NutTopQty |
Nut - Top Quantity |
Standard |
No |
Yes |
|
NutBotQty |
Nut - Bottom Quantity |
Standard |
No |
Yes |
|
Attribute Name |
Description |
Implementation Details |
|---|---|---|
|
IJUAhs_ABSNutSpacing |
Specifies how the Nut Spacing offset must be measured. |
Use the following values: 1 - Nut Spacing uses the thickness of the Upper Plate (Ignores all the Nut Spacing values that you type)
2 - Top of lower Nut to bottom of upper Nut
|
|
IJUAhs_ABSNutTopQty:: |
Specifies the number of top nuts to include. |
The software uses quantity only if the upper Nut part is present. |
|
IJUAhs_ABSNutBotQty:: |
Specifies the number of bottom nuts to include. |
The software uses quantity only if the Nut part is present. |
When you define Nut parts, one part is added for each bolt. The Nut parts are positioned
based on the PlateSpacing attribute. You must define the PlateSpacing attribute even if the Upper Plate part is not defined.
For more information about how to use the dimensional attributes, see Input Values.
