Part Attributes (Complex Pipe Strap) - Intergraph Smart Reference Data Standard Database - Version 12.0 - Help

Part Attributes (Complex Pipe Strap) - Intergraph Smart Reference Data Standard Database - Version 12.0 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help (2020)

Language

English

Product

Intergraph Smart Reference Data Standard Database

Search by Category

Help

Standard Database for Smart Reference Data Version

2020 (12.0)

The following attributes define the Complex Pipe Strap data driven assembly:

Attribute Name	Description	Implementation Details
IJUAhs_PipeStrap:: PipeStrapPart	Specifies the part number or a part class for a pipe strap that is used for the support.	Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Pipe Strap support is mandatory. You must specify either a PipeStrapPart or PipeStrapRule.
IJUAhs_PipeStrapRl:: PipeStrapRule	Specifies the hgrSupportRule that returns the part number for a hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog.
IJUAhsBasePlate1:: BasePlate1Part	Specifies the part number or part class of a base plate that is used by the support.	Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Base Plate support is mandatory.
IJUAhsBasePlate1Rl:: BasePlate1Rule	Specifies the hgrSupportRule that returns the part number for a hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog.
IJUAhsBaseWidth:: BasePlateWidth	Specifies the width of a base plate.
IJUAhsInsBlockPt:: InsBlockPart	Specifies the part number or part class of a base plate that is used by the support.	Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Insulation is an optional part.
IJUAhsInsBlockRl:: InsBlockRule	Specifies the hgrSupportRule that returns the part number for a hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog.
IJUAhsGap1::Gap1	Specifies the gap in the side strap.	The strap dimension changes only if IJUAhsStrap::StrapWidthInside is an occurrence attribute on the strap part.
IJUAhsTopGap1:: TopGap1	Specifies the gap in the top strap.	The strap dimension changes only if IJUAhsStrap::StrapHeightInside is an occurrence attribute on the strap part.
IJUAhsInsideRad:: Diameter	Specifies the inside diameter of a strap. If you do not specify any value for this attribute, the software calculates the diameter using the diameter of the pipe or the insulation.
IJUAhsWidthWings:: WidthWings	Specifies the total wing-to-wing width of a strap. If you do not specify a value, the software calculates the width depending on the pipe diameter.	The strap dimension changes only if IJUAhsStrap::StrapWidthInside is an occurrence attribute on the strap part.
IJUAhs_ShoeHeight:: ShoeHeight	Specifies the shoe height.	The strap dimension changes only if IJUAhsStrap::StrapHeightInside is an occurrence attribute on the strap part.
IJUAhs_BoltOffset:: BoltOffset	Specifies the bolt offset, if the bolt is available.
IJUAhsGapWings:: GapWings	Specifies the gap between the wings and the structure.	The strap dimension changes only if IJUAhsStrap::StrapHeightInside is an occurrence attribute on the strap part.
IJUAhsGusWings:: GusWingsHeight	Specifies the height of the gussets, if the gussets are available.	The strap dimension changes only if IJUAhsHeight3::Height3 is an occurrence attribute on the strap part.
IJUAhsPlateOnOff:: Plate	Toggles the base plate on or off.
IJUAhsPlateThick:: PlateThick	Specifies the thickness of the base plate.
IJUAhsBasePlOff:: BasePlOff	Specifies the vertical offset of the base plate.
IJUAhs_InsulationTh:: InsulationThickness	Specifies the thickness of the insulation.
IJUAhs_RepadPart::RepadPart	Specifies the part number or a part class for a repad that is used for the support.	Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Repad is an optional part
IJUAhs_RepadRl::RepadRule	Specifies the hgrSupportRule that returns the part number for a hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog.