Input Dimensions - Intergraph Smart Reference Data Standard Database - Version 12.4 - Help - Hexagon

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Smart 3D Version
13.1
Standard Database for Smart Reference Data Version
12.4

Use these properties to determine the total frame span and frame length.

Attribute Name

Description

Implementation Details

IJUAhsFrameOffset1::Offset1Value

Specifies the distance that the member should be offset from the pipe. To select the offset value using Offset1Rule, do not type any value for this property.

IJUAhsFrameOffset1Rl::Offset1Rule

Defines an HgrSupportRule that returns the offset from the member to the pipe. The hanger rule name or the ProgID must exist in the catalog. To select the offset value using Offset1Value, do not type any value for this property.

IJUAhsFrameOffset1Def::Offset1Definition

Specifies how Offset1 should be measured. If you type an unsupported value or do not assign a value, then the software uses the default value that is 1. For I frame, this value is ignored and is always calculated from Pipe Center to Steel Center. The following values are allowed:

IFRAME1

IJUAhsFrameOffset1Sel::Offset1Selection

Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select Offset1 by either input or rule. Allowed values are:

By Rule - 1 – Offset1Rule is used

By Input - 2 – Offset1Value is used

IJUAhsFrameOffset2::Offset2Value

Specifies the distance that the member should be offset from the pipe. To select the offset value using Offset2Rule, do not type any value for this property.

IJUAhsFrameOffset2Rl::Offset2Rule

Defines an HgrSupportRule that returns the offset from the member to the pipe. The hanger rule name or the ProgID must exist in the catalog. To select the offset value using Offset2Value, do not type any value for this property.

IJUAhsFrameOffset2Def::Offset2Definition

Specifies how Offset2 should be measured. If you type an unsupported value or do not assign a value, then the software uses the default value that is 1. For I frame, this value is ignored and is always calculated from Pipe Center to Steel Center. The following values are allowed:

IFRAME1

IJUAhsFrameOffset2Sel::Offset1Selection

Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select Offset2 by either input or rule. Allowed values are:

By Rule - 1 – Offset1Rule is used

By Input - 2 – Offset1Value is used

IJUAhsFrameShoeHeight::ShoeHeightValue

Specifies the distance that the main steel member should be offset from the pipe. To determine the shoe height using ShoeHeightRule, do not type any value for this property.

IJUAhsFrameShoeHeightRl::ShoeHeightRule

Defines an HgrSupportRule that returns the shoe height. The hanger rule name or the ProgID must exist in the catalog. To determine the shoe height using ShoeHeightValue, do not type any value for this property.

IJUAhsFrameShoeHeightDef::ShoeHeightDefinition

Specifies how ShoeHeight should be measured. If you type an unsupported value or do not assign any value, then the software uses the default value that is 1.

From centre of pipe.

From bottom of pipe.

IJUAhsFrameShoeHeightSel::ShoeHeightSelection

Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select ShoeHeightValue by either input or rule. The following values are allowed:

By Rule - 1 – ShoeHeightRule is used

By Input - 2 – ShoeHeightValue is used

IJUAhsSuppPosOffset::SupPosOff

Specifies the support distance from origin of the support. To determine the support position offset using SupPosOffRl, do not type any value for this property.

IJUAhsSuppPosOffsetRl::SupPosOffRl

Defines a HgrSupportRule that returns the support position offset. The hanger rule name or the ProgID must exist in the catalog. To determine the support position using SupPosOff, do not type any value for this property.