A LV-Frame uses the following part attributes:
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsLeg1:: Leg1Part |
The Part-Number or Part Class of the first support leg to use for the support. |
Option 1 – Specify a Part-Number or Part Class directly Option 2 – Use a HgrRule to get the Part The box frame is a mandatory part. Either a Leg1Part or Le1Rule must be specified. |
IJUAhsLeg1Rl:: Leg1Rule |
An HgrSupportRule that returns a hanger beam pipe Part-Number. The Hanger Rule should be present in the catalog; it can be the name of a rule, or a rule ProgID. |
|
IJUAhsLeg1Ang:: Leg1OrientationAngle |
Specifies the angle of rotation about the axis of the leg for the first member of the support. |
hsSteelOrientalAngle: |
IJUAhsLeg1BeginOH:: Leg1BeginOverhangValue |
Specifies a numerical value for the distance that the first leg should overhang past the main member. To select the overhang value using Leg1BeginOverhangRule, do not type any value for this property. |
|
IJUAhsLeg1BeginOHRl:: Leg1BeginOverhangRule |
Defines an HgrSupportRule that returns the distance that the first leg should overhang past the main member. The hanger rule should exist in the catalog; it can be a rule name or a ProgID. The rule must return the value in the DB Units (meters). To select the overhang value directly using Leg1BeginOverhangValue, do not type any value for this property. |
|
IJUAhsLeg1BeginOHDef:: Leg1BeginOverhangDefinition |
Defines how the begin overhang should be measured. |
|
IJUAhsLeg1BeginOHSel:: Leg1BeginOverhangSelection |
Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select Leg1BeginOverhang by either input or rule. |
Allowed values are: By Rule - 1 - Leg1BeginOverhangRule is used By Input - 2 - Leg1BeginOverhangValue is used |
IJUAhsLeg1EndOH:: Leg1EndOverhangValue |
Specifies the distance that the first leg should overhang past the supporting object. To select the value of the overhang using Leg1EndOverhangRule, do not type any value for this property. |
|
IJUAhsLeg1EndOHRl:: Leg1EndOverhangRule |
Defines an HgrSupportRule that returns the distance that the first leg should overhang past the supporting object. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the value of the overhang directly using Leg1EndOverhangValue, do not type any value for this property. |
|
IJUAhsLeg1EndOHDef:: Leg1EndOverhangDefinition |
Defines how the end overhang should be measured with respect to the supporting object. If you do not type any value, a default value of 1 is used. |
The following values are allowed: |
IJUAhsLeg1EndOHSel:: Leg1EndOverhangSelection |
Uses the hsSelection Codelist in the HS_S3DAssy_Codelist.xls workbook to select Leg1EndOverhang by either input or rule. |
Allowed values are: By Rule - 1 - Leg1EndOverhangRule is used By Input - 2 - Leg1EndOverhangValue is used |
IJUAhsCapPlate1:: CapPlate1Part |
Specifies the part number or the part class for the plate placed at the end of the main section and at the end connected to the member. To select the part using CapPlate1Rule, do not type any value for this property. |
Option 1 – Specify a Part-Number or Part Class directly Option 2 – Use a HgrRule to get the Part The cap plate is an optional part. Leave these attributes blank if you do not want to include a cap plate. |
IJUAhsCapPlate1Rl:: CapPlate1Rule |
Specifies the hgrSupportRule that returns the part number for the hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsCapPlate1Ang:: CapPlate1Angle |
Specifies the angle that CapPlate1 should be rotated about the Z-axis of the port to which the plate is attached. |
|
IJUAhsMember1:: Member1Part |
Specifies the part number or the part class of the first support member to use for the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. The base support is a mandatory part. Specify either a Member1Part or Member1Rule. |
IJUAhsMember1Rl:: Member1Rule |
Specifies the hgrSupportRule that returns the part number for the hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsMember1Ang:: Member1OrientationAngle |
Specifies the angle of rotation about the axis of the leg for the first member of the support. |
hsSteelOrientalAngle: |
IJUAhsCapPlate2:: CapPlate2Part |
Specifies the part number or the part class for the plate placed at the end of the main section and at the end connected to the member. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. The base support is a mandatory part. Specify either a Member1Part or Member1Rule. |
IJUAhsCapPlate2Rl:: CapPlate2Rule |
Specifies the hgrSupportRule that returns the part number for the hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsCapPlate2Ang:: CapPlate2Angle |
Specifies the angle that CapPlate2 should be rotated about the Z-axis of the port to which the plate is attached. |
|
IJUAhsCapPlate3:: CapPlate3Part |
Specifies the part number or the part class of the plate placed at the end of the main section and at the end connected to the first leg. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. The base support is a mandatory part. Specify either a Member1Part or Member1Rule. |
IJUAhsCapPlate3Rl:: CapPlate3Rule |
Specifies the hgrSupportRule that returns the part number for the hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsCapPlate3Ang:: CapPlate3Angle |
Specifies the angle that CapPlate3 should be rotated about the Z-axis of the port to which the plate is attached (either BeginFace or EndFace). |
For more information on how to use part specification attributes, see Part Specifications of Common Attributes section.