The following attributes are used to define the parts that are included in a Shoe support:
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhs_Shoe::ShoePart |
Specifies the shoe SmartPart that the support uses. |
|
IJUAhsTopShoe::TopShoePart |
Specifies the Top shoe SmartPart that the support uses. |
|
IJUAhsRightShoe::RightShoePart |
Specifies the Right shoe SmartPart that the support uses. |
|
IJUAhsLeftShoe::LeftShoePart |
Specifies the Left shoe SmartPart that the support uses. |
|
IJUAhsInsBlockPt:: |
Specifies the Plate SmartPart that the support uses to represent the insulation block. |
|
IJUAhsShoeType::ShoeType |
Specifies the hsShoeType Codelist number |
|
IJUAhs_ShoePlate::HorizontalPlate |
Specifies the Horizontal plate part of the shoe that the support uses. Horizontal plate part should be the TwoStandardPort plate part. progID of the plate smart part is HSSmartPart,Ingr.SP3D.Content.Support.Symbols.TwoStandardPort. |
|
IJUAhs_ShoePlate::HorizontalPlateRl |
A hgrSupportRule that returns the part number of the horizontal plate that needs to be included in the support. The Hanger Rule must exist in the catalog and must be a rule Name. |
|
IJUAhs_ShoePlate::VerticalPlate |
Specifies the Vertical plate part of the shoe that the support uses. Vertical plate part should be the TwoStandardPort plate part. progID of the plate smart part is HSSmartPart,Ingr.SP3D.Content.Support.Symbols.TwoStandardPort). |
|
IJUAhs_ShoePlate::VerticalPlateQty |
Specifies the quantity of the vertical plates Qty 1 for shoe type 1 and 11 Qty 2 for shoe types 3,4,7,8, and 9. |
|
IJUAhs_ShoePlate::VerticalPlateRl |
A hgrSupportRule that returns the part number of the Vertical plate that needs to be included in the support. The Hanger Rule must exist in the catalog and must be a rule Name. |
|
IJUAhs_ShoePlateOffset::VerticalPlOffset |
Specifies the vertical plates offset. |
|
IJUAhs_ShoePlateOffset::VerticalPlAngle |
Specifies the angle of the vertical plates. This is applicable only for shoe type 7. |
|
IJUAhsInsBlockRl:: |
A hgrSupportRule that returns the insulation block part. The Hanger Rule must exist in the catalog and must be a rule Name. |
|
IJUAhs_ShearLugPart:: |
Specifies the shear lug part that the support uses. Shear lug part can be a Shield SmartPart or a RoutePort SmartPart. |
The following smartpart class ProgID types are supported: Shield (Repad) RoutePort (Plate) |
IJUAhs_ShearLugPartRl:: |
A hgrSupportRule that returns the shear lug part. Hanger Rule must exist in the catalog and must be a rule name. |
|
IJUAhs_ShearLugQty:: |
Specifies the number of shear lug parts to include in the support. |
|
IJUAhs_ShearLugQtyRl:: |
A hgrSupportRule that returns the number of shear lugs that need to be included in the support. The Hanger Rule must exist in the catalog and must be a rule Name. |