The following attributes are used to define which parts are included in the Multi Pipe Wallsupport.
Leg1 Properties
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsLeg1::Leg1Part |
The part number or the part class of the first support leg to use with the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Specify either a Leg1Part or Leg1Rule. |
IJUAhsLeg1Rl::Leg1Rule |
Specifies the hgrSupportRule that returns the part number of the Leg1Part. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsLeg1Ang:: |
Specifies the angle of rotation for the first leg of support. The angle is about the axis of the leg. |
hsSteelOrientalAngle: |
Leg2 Properties
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsLeg2::Leg2Part |
The part number or the part class of the second support leg to use with the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Specify either a Leg2Part or Leg2Rule. |
IJUAhsLeg2Rl::Leg2Rule |
Specifies the hgrSupportRule that returns the part number of the Leg2Part. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsLeg2Ang:: |
Specifies the angle of rotation for the first leg of support. The angle is about the axis of the leg. |
hsSteelOrientalAngle: |
Member1 Properties
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsMember1::Member1Part |
The part number or the part class of the first support member to use with the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Specify either a Member1Part or Member1Rule. |
IJUAhsMember1Rl::Member1Rule |
Specifies the hgrSupportRule that returns the part number of the Member1Part. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsMember1Ang::Member1OrientationAngle |
Specifies the angle of rotation for the first Member of support. |
hsSteelOrientalAngle: |
IJUAhsMember1BeginOH::Member1BeginOverhangValue |
Specifies a positive number value for the distance that the first member should past the first leg. To select the overhang using Member1BeginOverhangRule, do not enter any value for this property. |
|
IJUAhsMember1BeginOHRl::Member1BeginOverhangRule |
An HgrSupportRule that returns the distance. The Hanger Rule should be present in the catalog; it can be the name of a rule, or a rule ProgID. |
1-External Edge of steel 2-Center Line of Steel 3-Internal Edge of steel |
IJUAhsMember1BeginOHDef::Member1BeginOverhangDefinition |
Specifies how the begin overhang should be measured. |
|
IJUAhsMember1BeginOHSel::Member1BeginOverhangSelection |
A code list value that specifies how the begin overhang should be measured. |
hsSelection 1 – By Rule Member1BeginOverhangRule is used 2 – By Input Member1BeginOverhangValue is used |
IJUAhsMember1EndOH::Member1EndOverhangValue |
Specifies a positive number value for the distance that the first member should past the second leg. To select the overhang using Member1EndOverhangRule, do not enter any value for this property. |
|
IJUAhsMember1EndOHRl::Member1EndOverhangRule |
An HgrSupportRule that returns the distance. The Hanger Rule should be present in the catalog; it can be the name of a rule, or a rule ProgID. |
|
IJUAhsMember1EndOHDef::Member1EndOverhangDefinition |
Specifies how the end overhang should be measured. |
1-External Edge of steel 2-Center Line of Steel 3-Internal Edge of steel |
IJUAhsMember1EndOHSel::Member1EndOverhangSelection |
A code list value that specifies how the end overhang should be measured. |
hsSelection 1 – By Rule Member1EndOverhangRule is used 2 – By Input Member1EndOverhangValue is used |
Member2 Properties
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsMember2::Member2Part |
The part number or the part class of the second support member to use with the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Specify either a Member2Part or Member2Rule. |
IJUAhsMember2Rl::Member2Rule |
Specifies the hgrSupportRule that returns the part number of the Member2Part. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsMember2Ang::Member2OrientationAngle |
Specifies the angle of rotation for the second member of support. |
hsSteelOrientalAngle: |
IJUAhsMember2BeginOH::Member2BeginOverhangValue |
Specifies a positive number value for the distance that the second member should past the first leg. To select the overhang using Member2BeginOverhangRule, do not enter any value for this property. |
|
IJUAhsMember2BeginOHRl::Member2BeginOverhangRule |
An HgrSupportRule that returns the distance. The Hanger Rule should be present in the catalog; it can be the name of a rule, or a rule ProgID. |
|
IJUAhsMember2BeginOHDef::Member2BeginOverhangDefinition |
Specifies how the begin overhang should be measured. |
1-Internal Edge o the Steel 2-Centre Line of Steel 3-External Edge of the steel |
IJUAhsMember2BeginOHSel::Member2BeginOverhangSelection |
A code list value that specifies how the begin overhang should be measured. |
hsSelection 1 – By Rule Member2BeginOverhangRule is used 2 – By Input Member2BeginOverhangValue is used |
IJUAhsMember2EndOH::Member2EndOverhangValue |
Specifies a positive number value for the distance that the second member should past the second leg. To select the overhang using Member2EndOverhangRule, do not enter any value for this property. |
|
IJUAhsMember2EndOHRl::Member2EndOverhangRule |
An HgrSupportRule that returns the distance. The Hanger Rule should be present in the catalog; it can be the name of a rule, or a rule ProgID. |
|
IJUAhsMember2EndOHDef::Member2EndOverhangDefinition |
Specifies how the end overhang should be measured. |
1-External Edge of steel 2-Center Line of Steel 3-Internal Edge of steel |
IJUAhsMember2EndOHSel::Member2EndOverhangSelection |
A code list value that specifies how the end overhang should be measured. |
hsSelection 1 – By Rule Member2EndOverhangRule is used 2 – By Input Member2EndOverhangValue is used |
Multi Pipe WallSupport Dimension Attributes
The Multi Pipe WallSupport assembly uses the following Input and Output dimensions:
Input Dimensions
You can set default values for the input dimensions. If the attributes are Occurrence Attributes (OA), you can modify the default values in the Support Properties dialog box. Select Dimensions from the Category list on the General tab.
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsFrameOffset1::Offset1Value IJUAhsFrameOffset1Rl::Offset1Rule IJUAhsFrameOffset1Def::Offset1Definition IJUAhsFrameOffset1Sel::Offset1Selection |
Specifies the offset distance from Leg1 to Leftmost Pipe. The distance must be a positive value. |
Use the following definitions: 1 – Leg1 to One Edge of leftmost Pipe 2 – Leg1 to center of leftmost Pipe 3 – Leg1 to Other Edge of leftmost Pipe |
IJUAhsFrameOffset2:: Offset2Value IJUAhsFrameOffset2Rl:: Offset2Rule IJUAhsFrameOffset2Sel:: Offset2Selection IJUAhsFrameOffset2Def:: Offset2Definition |
Specifies the offset distance from Leg2 to Rightmost Pipe. The distance must be a positive value. |
Use the following definitions: 1 – Leg2 to One Edge of rightmost Pipe 2 – Leg2 to center of rightmost Pipe 3 – Leg2 to Other Edge of rightmost Pipe |
IJUAhsFrameVerticalSpace::VerticalSpaceValue IJUAhsFrameVerticalSpaceRl::VerticalSpaceRule IJUAhsFrameVerticalSpaceDef::VerticalSpaceDefinition IJUAhsFrameVerticalSpaceSel::VerticalSpaceSelection |
Specifies the distance between member1 and member 2. The distance must be a positive value. |
Use the following definitions: 1 – Between inner edges of members 2 - Between centers of members 3 - Between outer edges of members |
Output Dimensions
determines the following output dimension values and displays them as read-only in the property page:
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsFrameLength1::Length1Value IJUAhsFrameLength1Def::Length1Definition |
Specifies the length of the members. |
Use the following definitions: 1 – Member Length 2 – Length between Leg1 center and leg2 center. |
IJUAhsFrameLength2::Length2Value IJUAhsFrameLength2Def::Length2Definition |
Specifies the length of the leg. |
Use the following definitions: 1 – Between inner edges of members 2 - Between centers of members 3 - Between outer edges of members |