Beam to Beam support uses all the General Attributes specified in the Common Attributes section and the following attributes:
Name |
User Name |
Category |
On Property Page |
Read only |
---|---|---|---|---|
PrimaryBeamConn |
Primary Beam Connection |
Standard |
Yes |
No |
SecondaryBeamConn |
Secondary Beam Connection |
Standard |
Yes |
No |
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsPriBeamConn:: |
Specifies a codelist value that determines the way in which the Beam to Beam support connects to the primary supporting structure. A primary supporting structure is the first structure to be selected when placing the Beam to Beam support. The end cuts of a horizontal Beam are not modeled. |
1 - Above 2 - Top 3 - Top Inside 4 - Center 5 - Bottom Inside 6 - Bottom 7 - Below 8 - Vertical Plate
|
IJUAhsSecBeamConn:: |
Specifies a codelist value that determines the way in which the Beam to Beam support connects to the secondary supporting structure. The primary supporting structure determines the elevation of the Beam. The secondary Beam connection determines if the Beam must extend to the Web or the Flange of the secondary supporting structure so that the software gets the proper length. |
1 - Web 2 - Flange 3 - Vertical Plate |