The following attributes are used to define the attributes of a Shear Lug support. For more information on how to use the attributes, see Shear Lug Attributes:
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhs_ShearLugQty:: |
Specifies the quantity of shear lug parts to include in the support. |
|
IJUAhs_ShearLugQtyRl:: |
Specifies a hgrSupportRule that returns sheer lug quantity. The hanger rule must exist in the catalog and must be a rule name. |
|
IJUAhs_ShearLugOffset:: IJUAhs_ShearLugOffsetRl:: IJUAhs_ShearLugOffsetDef:: |
Specifies the offset for the shear lug. |
Definition values: 1 - Offset from Clamp 2 - Offset from Shield 3 - Offset from Shield 2 |
IJUAhs_ShearLugOffsetRl:: |
Specifies a hgrSupportRule that returns offset for the sheer lug. The hanger rule must exist in the catalog and must be a rule name. |
|
IJUAhs_ShearLugOffsetDef:: |
Specifies how the offset must be measured. |
Definition values: 1 - Offset from Clamp 2 - Offset from Shield 3 - Offset from Shield 2 |
IJUAhs_ShearLugRot:: |
Specifies the number of degrees a sheer lug is rotated around the pipe from the default placement position. |
The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook; otherwise specify the units. Example: 100 deg, 100rad. |
IJUAhs_ShearLugRotRl:: |
Specifies a hgrSupportRule that returns the value for SheerLugRotation. The hanger rule must exist in the catalog and must be a rule name. |
Rule Name: ShearLugRotationBySize |
IJUAhs_ShearLugLen:: |
Specifies the length of the sheer lug. |
The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook; otherwise, specify the units. Example: 100 mm, 100 in. |
IJUAhs_ShearLugLenRl:: |
Specifies a hgrSupportRule that returns the value for SheerLugLength. The hanger rule must exist in the catalog and must be a rule name. |
Rule Name: ShearLugLengthBySize |
IJUAhs_ShearLugLoc:: |
Specifies the codelist value that defines where to position the shear lugs. |
Location values: 1 - Top 2 - Bottom 3 - Both |
IJUAhs_ShearLugThk:: |
Specifies the thickness of shear lug. |
The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook; otherwise specify the units. |
IJUAhs_ShearLugThkRl:: |
Specifies a hgrSupportRule that returns the value for SheerLugThk. The hanger rule must exist in the catalog and must be a rule name. |
Rule Name: ShearLugThkBySize |
IJUAhs_ShearLugWidth:: |
Specifies the width of the shear lug. |
The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook; otherwise, specify the units. |
IJUAhs_ShearLugWidthRl:: |
Specifies a hgrSupportRule that returns the value for SheerLugWidth. The hanger rule must exist in the catalog and must be a rule name. |
Rule Name: ShearLugWidthBySize |