Member1 and CapPlate3/4 Properties - Intergraph Smart Reference Data Standard Database - Version 12.1 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
12.1

The following attributes define the Member1 and CapPlate3/4 attributes of a Base Support data driven assembly:

Attribute Name

Description

Implementation Details

IJUAhsMember1::
Member1Part

Specifies the part number or the part class of the first support member to use for the support.

Option 1 - Specify a part number or part class directly.

Option 2 - Use HgrRule to get the part.

The base support is a mandatory part. Specify either a Member1Part or Member1Rule.

The following ProgIDs are supported:

IJUAhsMember1Rl::
Member1Rule

Specifies the hgrSupportRule that returns the part number for the hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog.

TypeAssy

3

4, 5

ProgID

TwoHolePort

TwoStandardPort

IJUAhsMember1Ang::
Member1OrientationAngle

Specifies the angle of rotation about the axis of the leg for the first member of the support.

hsSteelOrientalAngle:

Base Support - Part Attributes - Leg1 Orientation Angle

IJUAhsMember1BeginOH::
Member1Begin
OverhangValue

Specifies the distance that the first member overhangs past the first leg.

To select the overhang using Member1BeginOverhangRule, do not specify any value for this property.

IJUAhsMember1Begin
OHRl::Member1Begin
OverhangRule

Specifies the hgrSupportRule that returns the distance. The hanger rule must be the name of an existing rule in the catalog.

IJUAhsMember1EndOH::
Member1End
OverhangValue

Specifies the distance that the first member overhangs past the first leg.

To select the overhang using Member1EndOverhangRule, do not specify any value for this property.

IJUAhsMember1EndOHRl::
Member1End
OverhangRule

Specifies the hgrSupportRule that returns the distance. The hanger rule must be the name of an existing rule in the catalog.

IJUAhsSteelLen::
SteelLength

Specifies the length for the member support.

IJUAhsSteelLenRl::
SteelLengthRule

Specifies the hgrSupportRule that returns the length. The hanger rule must be the name of an existing rule in the catalog.

IJUAhsLugOffset1::
LugOffset1

Specifies the distance by which a lug is offset from the edge of Leg1 part.

Base Support - Member1 & CapPlate Attributes - LugOffset1

LugOffset is applicable only when the AssyType is set to 3.

IJUAhsLugBolt::
LugBoltPart

Specifies the part number or part class of the bolts that are connected to BasePlate1.

To select the overhang using LugBoltRule, do not specify any value for this property.

Option 1 - Specify a part number or part class directly.

Option 2 - Use HgrRule to get the part.

The pipe attachment is an optional part. If you do not require a pipe attachment, do not specify these attributes.

IJUAhsLugBoltRl::
LugBoltRule

Specifies the hgrSupportRule that returns the plate part number. The hanger rule must be the name of an existing rule in the catalog.

To select the overhang using LugBoltPart, do not specify any value for this property.

IJUAhsLugBoltQty::
LugBoltQuantity

Specifies the number of bolts to include on the BasePlate1.

IJUAhsLugBoltOffset1::
LugBoltOffset1

Specifies the distance by which the lug bolt must be offset from the center of the lug plate.

Base Support - Member1 & CapPlate - LugBoltOffset1

LugBoltOffset is applicable only when the AssyType is set to 3.

IJUAHsBSLegLateralOS::
LateralOffSet

Specifies the distance by which the leg must be offset in Y direction

Lateral Offset

LateralOffSet is applicable only when the AssyType is set to 3.

IJUAhsCapPlate3::
CapPlate3Part

Specifies the part number or part class of the plate part to use for the support.

To select the part number using CapPlate3Rule, do not specify any value for this property.

Option 1 - Specify a part number or part class directly.

Option 2 - Use HgrRule to get the part.

The cap plate is an optional part. If you do not require a Cap Plate, do not specify this attribute.

IJUAhsCapPlate3Rl::
CapPlate3Rule

Specifies the hgrSupportRule that returns the plate part number. The hanger rule must be the name of an existing rule in the catalog.

To select the part number using CapPlate3Part, do not specify any value for this property.

IJUAhsCapPlate3Ang::
CapPlate3Angle

Specifies the rotation angle for the Cap Plate about the axis of the Box Frame.

IJUAhsCapPlate4::
CapPlate4Part

Specifies the part number or part class of the plate part to use for the support.

To select the part number using CapPlate4Rule, do not specify any value for this property.

Option 1 - Specify a part number or part class directly.

Option 2 - Use HgrRule to get the part.

The Cap Plate is an optional part. If you do not require a Cap Plate, do not specify this attribute.

IJUAhsCapPlate4Rl::
CapPlate4Rule

Specifies the hgrSupportRule that returns the plate part number. The hanger rule must be the name of an existing rule in the catalog.

To select the part number using CapPlate4Part, do not specify any value for this property.

IJUAhsCapPlate4Ang::
CapPlate4Angle

Specifies the rotation angle for the Cap Plate about the axis of the box frame.