Name |
User Name |
OA |
Category |
On Property Page |
Read Only |
---|---|---|---|---|---|
ShearLugQty |
Shear Lug Quantity |
Yes |
Standard |
Yes |
No |
ShearLugQtyRule |
Shear Lug Quantity Rule |
No |
Standard |
No |
Yes |
ShearLugOffset |
Shear Lug Offset |
Yes |
Dimensions |
Yes |
No |
ShearLugOffsetRule |
Shear Lug Offset Rule |
No |
Standard |
No |
Yes |
ShearLugOffsetDef |
Shear Lug Offset Def |
No |
Standard |
No |
Yes |
ShearLugRotation |
Shear Lug Rotation |
Yes |
Dimensions |
Yes |
No |
ShearLugRotationRule |
Shear Lug Rotation Rule |
No |
Standard |
No |
Yes |
ShearLugLength |
Shear Lug Length |
No |
Standard |
No |
Yes |
ShearLugLengthRule |
Shear Lug Length Rule |
No |
Standard |
No |
Yes |
ShearLugLocation |
Shear Lug Location |
Yes |
Standard |
Yes |
No |
ShearLugThk |
Shear Lug Thickness |
Yes |
Dimensions |
Yes |
No |
ShearLugThkRl |
Shear Lug Thickness Rule |
No |
Standard |
No |
Yes |
ShearLugWidth |
Shear Lug Width |
Yes |
Dimensions |
Yes |
No |
ShearLugWidthRule |
Shear Lug Width Rule |
No |
Standard |
No |
Yes |
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhs_ShearLugQty:: |
Specifies the number of shear lugs to be included in the support. |
The value must be an integer. |
IJUAhs_ShearLugQtyR1:: |
Specifies the hgrSupportRule that returns the number of shear lugs to be used in the support. The hanger rule must be the name of an existing rule in the catalog. To select the part number using ShearLugQty, do not specify any value for this property. |
For example: Rule Name: ShearLugQtyByPipeDia Rule ProgID: HS_S3DRules.ShearLugQtyByPipeDia |
IJUAhs_ShearLugOffset:: |
Specifies the offset for the shear lug. If a clamp is available, the software bases the offset on the clamp position. If a clamp is not available, the software offsets other parts depending on the riser lug position. |
The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook; otherwise, specify the units. For example, 200, 200mm, 25in. |
IJUAhs_ShearLugOffsetRl:: |
Specifies the hgrSupportRule that returns the offset for the Shear lug The hanger rule must be the name of an existing rule in the catalog. To select the part number using ShearLugOffset, do not specify any value for this property. |
For example: Rule Name: ShearLugOffsetByPipeDia Rule ProgID: HS_S3DRules.ShearLugOffsetByPipeDia |
IJUAhs_ShearLugOffsetDef:: |
Defines the Shear lug offset and determines how to measure the attachment. If you set a value for ShearLugOffset but do not specify a definition, the software displays an error message. |
1 - Offset from the edge If clamp is available: If a clamp is not available: |
IJUAhs_ShearLugRot:: |
Specifies the angle of rotation for the shear lug around the pipe from the default placement position. |
The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook, else specify the units. For example, 100 deg, 200 rad. |
IJUAhs_ShearLugRotRl:: |
Specifies the hgrSupportRule that returns the angle of rotation for shear lug. The hanger rule must be the name of an existing rule in the catalog. To select the part number using ShearLugRotation, do not specify any value for this property. |
For example: Rule Name: ShearLugRotationBySize Rule ProgID: HS_S3DRules.ShearLugRotationBySize |
IJUAhs_ShearLugLen:: |
Specifies the length of the shear lug. |
The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook; otherwise, specify the units. For example, 100 deg, 200 rad. |
IJUAhs_ShearLugLenRl:: |
Specifies the hgrSupportRule that returns the length of the shear lug. The hanger rule must be the name of an existing rule in the catalog. To select the part number using ShearLugLength, do not specify any value for this property. |
For example: Rule Name: ShearLugLengthBySize Rule ProgID: HS_S3DRules.ShearLugLengthBySize |
IJUAhs_ShearLugLoc:: |
Specifies a codelist value to determine the position of the shear lugs. |
1 - Top 2 - Bottom 3 - Both |
IJUAhs_ShearLugThk:: ShearLugThk |
Specifies the thickness of the shear lug. |
The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook, else specify the units. For example, 100 deg, 200 rad. RoutePort Part Shield Part |
IJUAhs_ShearLugThkRl:: |
Specifies the hgrSupportRule that returns the thickness of the shear lug. The hanger rule must be the name of an existing rule in the catalog. To select the part number using ShearLugThk, do not specify any value for this property. |
For example: Rule Name: ShearLugThkBySize Rule ProgID: HS_S3DRules.ShearLugThkBySize |
IJUAhs_ShearLugWidth:: |
Specifies the width of the shear lug. |
The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook; otherwise specify the units. For example, 100 deg, 200 rad. RoutePort Part Shield Part - Not applicable |
IJUAhs_ShearLugWidth:: |
Specifies the hgrSupportRule that returns the width of the shear lug. The hanger rule must be the name of an existing rule in the catalog. To select the part number using ShearLugWidth, do not specify any value for this property. |
For example: Rule Name: ShearLugWidthBySize Rule ProgID: HS_S3DRules.ShearLugWidthBySize |