Code Updates
-
No changes.
Configuration
-
Updated to support API-650 12th Edition, Addendum 3, August 2018 material database. (CR-TX-29811, CR-TX-29810)
-
Updated to support API-620 12th Edition, Addendum 1, November 2018 material database. (CR-TX-29873, CR-TX-29810)
-
TANK now supports the Intergraph SmartĀ® Licensing application.
Input Processor and Analysis
-
Updated TANK to implement the new Hexagon PPM on-line documentation site, so that our users can enjoy the benefits of this delivery system for documentation. (CR-TX-29084)
Output Processor and Reports
-
Updated TANK to implement the Addendum 3 update for the API-650 12th Edition code for top wind girders. Specifically, Paragraph 5.9.5.2 requires special parameters for top wind girders that are located > 2ft from the top of the tank. If the distance from the top of the tank to the top wind girder (user input) is greater than 2 ft, a note referencing the requirements in Paragraph 5.9.5.2 is printed in the report. (CR-TX-29863)
-
Updated TANK to implement the Addendum 3 update for the API-650 12th Edition code for frangible roof, for a new requirement for nominal thickness of lowest shell course cannot be less than 1/4 in. for frangible roofs. If roof otherwise meets requirements for frangibility, if the nominal thickness of the lowest shell course is greater than 1/4 in, no frangible roof calculations should happen. If less than 1/4 in., frangible roof calculations should print in the roof output report. (CR-TX-29864)
-
Updated TANK to implement the Addendum 3 update for the API-650 12th Edition code in the self-supporting cone thickness calculation. (CR-TX-29865)