Specifies in-line reducers.
Block name
Specifies the block drawing to be inserted into the drawing. The block must be set up with the proper insertion point, typically at the left side of the block. Click Browse to select a block drawing using a standard file selection dialog box.
Side 1 size
Specifies the distance from the center of the component to the end so that the block breaks the line correctly. The pline breaks at a distance to the right side at 0 degrees from the insertion point.
Scale
Specifies the scale factor used to scale the symbol in the drawing.
Table name
Specifies a table selection. This option is only available when an external database is used.
Layer name
Specifies the drawing layer on which the block is placed.
Description
Specifies a description of the block that is displayed in the Menu Maintenance dialog box.
Optional
Tag name
Specifies the tag drawing to be included with the block. Click Browse to select a drawing using a standard file selection dialog box.
Label name
Specifies the label drawing to be included with the block. Click Browse to select a drawing using a standard file selection dialog box.
Spec type
Defines a component specification for the block. Click Select to select the specification. The software reads information from the selected specification and populates the appropriate columns in the database. These columns must be pre-named as described in Column Setup (Database Table Setup Dialog Box) of Table Setup . P&ID and CADWorx Plant can use the same pipe specifications. They can also be placed in a common area as defined by SpecificationDirectory in the Configuration File dialog box.
The menu symbol file, Flow_alt.dat, contains the function insert_reducer. The Reducer tab controls this function.