Assign selection codes to components without catalog defaults - CADWorx - Reference Data

Open a project.

Click Yes to update the project from the base catalog. Alternatively, you can click Review Update, review the tables with updates, click Force Update All, click OK, click OK again, and then click Yes.

Double-click a specification.

Expand Gaskets/Bolts/Welds.

Select a bolt. Alternatively, you can right-click, select Add, and then fill in the data for a bolt in the New component pane.

Type a value in the Selection Code box.

Change any data that you need to update in the Edit component pane.

Click Apply. If you added a new component, click Add.

Select a gasket. Alternatively, you can right-click, select Add, and then fill in the data for a gasket in the New component pane.

Type a value in the Selection Code box.

Change any data that you need to update in the Edit component pane.

Click Apply. If you added a new component, click Add.

Expand Flanges.

Select a flange, such as Flange Weld Neck. Alternatively, you can right-click, select Add, and then fill in the data for a flange in the New component pane.

Change any data to update in the Edit component pane.

Select the selection code from the Applicable Gaskets list.

Select the selection code from the Applicable Bolts list.

Click Apply. If you added a new component, click Add.

Click File > Save.