Reviews and modifies transition features.
Properties
Opens a dialog box with properties for the selected feature. Allows you to review the properties of the selected feature and change the value assigned to a property.
Move From
Defines the origin of the move vector. If you do not define a starting point, the current location of the transition is assumed to be the starting point.
Move To
Defines the termination point of the move vector.
End
Defines which end of the transition you are modifying.
Plane
Plan Plane
Defines the work surface as the XY plane at the depth of the active end. You also can press CTRL+1 to select this option.
Elevation Plane: East-West ( Z Plane: X-Axis)
Defines the work surface as the XZ plane. You also can press CTRL+2 to select this option.
Elevation Plane: North-South ( Z Plane: Y-Axis)
Defines the work surface as the YZ plane. You also can press CTRL+3 to select this option.
Plane by Turn/Branch
Defines the work surface as the plane defined by an existing turn or branch. You select the turn or branch to set the plane. You also can press CTRL+4 to select this option.
Plane by Three Points
Defines the work surface using three points that you define. You also can press CTRL+5 to select this option.
No Plane
Clears any work surfaces. The software does not project points that you place to any plane. You also can press CTRL+6 to select this option.
Width Plane
Defines the work surface along the width of the duct. This option is available when Shape is defined as Rectangle or Flat Oval, and Type is defined as Turn or Miter Turn.
Depth Plane
Defines the work surface along the depth of the duct. This option is available when Shape is defined as Rectangle or Flat Oval, and Type is defined as Turn or Miter Turn.
Type
Defines the transition type for the active end.
Shape
Defines the shape of the transition end. The shape you select determines the other controls that display on the ribbon.
Rectangle
Width
Defines the width of the feature.
Depth
Defines the depth of the feature.
Radius
Defines the corner radius of a rectangular duct.
Round
Diameter
Defines the diameter of the feature.
Flat Oval
Width
Defines the width of the feature.
Depth
Defines the depth of the feature.
Orientation
Defines the orientation of the transition end. A value of 0 results in a transition end with the width horizontal and the depth vertical. A value of 90 degrees results in the width vertical and the depth horizontal. The value for an angles ranges from 0 to 360 degrees.
Align
Defines the transition alignment. Options include Align Centerline, Align Top Left, Align Top Right, Align Bottom Right, Align Bottom Left, Align Top Center, Align Right Center, Align Bottom Center, Align Left Center, and Not Aligned.
Length
Defines the length of the transition end.