Using the S.40.30 Simulation for Geometrics screen, you can perform a verification of the definitions for your user-defined target table and the existing relation for the applied standard tables. After a successful check, the simulation can be performed and a temporary table will be filled with the defined geometric data.
To perform a simulation for geometrics, do the following.
-
In the Formula field, select the formula you defined on the S.40.20 Geometric Formulas screen.
-
Click Run Query.
-
Clear the Simulate check box for formulas where you do not want to perform a geometric simulation, and select Simulate for the formular you want to use for the geometric simulation.
-
Click the Validate button in the row with the selected Simulate check box.
If the simulation is successfully, the Geometric field in the second (Name of Simulated Table) block gets a yellow background color.
-
Click Run Query again.
The geometric table name of type S.40.12 will be indicated.
-
Go to the next block and verify the simulated data shown in the temporary table.
-
To export the data to your user-defined table, return to the S.40.30 Simulation for Geometrics screen and select the Transfer check box.
-
Click any of the available buttons to transfer the data into the user-defined target table.
-
Add only new rows
-
Replace old by new rows
-
Delete only invalid rows
-
Delete archiver
-
-
Verify the generated data in the target geometric table.
Open the S.40.12 Commodity Geometrics screen, query for the geometric table, and click Next Block to open Window 2.
-
Check the geometric details.