Displays the options that you use to modify a straking seam.
Properties
Opens the Profile Straking Seam Properties Dialog, which you can use to edit properties for the seam.
Profile System
Specifies the profile system or the plate system that has associated profile systems upon which to place a straking seam. The seams are placed on the child detailed parts of the profile systems. You can select stiffener profile systems or linear beam profile systems.
References
Specifies objects that intersect the detailed profile part at which to place the seam. Objects that you can select as references include: reference curves, reference planes, plate systems, edge reinforcement systems, seams (design, planning, and straking), profile systems (landing curve), and edge ports including openings.
Finish
Modifies the seam using the parameters that you have defined.
Cancel
Rejects the selected objects.
Accept
Accepts the selected objects and advances the command to the next step.
Offset Method
Specifies the offset method, if needed.
Offset Value
Specifies the offset value. You can indicate the direction of the offset by typing a plus (+) or minus (-) sign in front of the offset value. A positive value is offset in the positive direction of the closest main coordinate system axis.