-
Expand Flanges. If you are not in the 150 specification, double-click to open it, and then expand Flanges.
-
Click FLG WELD NECK, 150LB, SCH XS, ASTM A105.
-
In the Edit component pane, select GAS_150 from the Applicable Gaskets list and BLT_150 from the Applicable Bolts list.
-
Click Apply.
-
Click FLG WELD NECK, 150LB, SCH XS, ASTM A105 Part A
-
In the Edit component pane, reselect FLG_WN_150 from the Data Table list.
The Applicable Gaskets and Applicable Bolts boxes populate.
-
In the Edit component pane, add GAS_150A from the Applicable Gaskets list and BLT_150A from the Applicable Bolts list.
-
Click Apply.
-
Click FLG WELD NECK, 150LB, SCH XS, ASTM A105 Part B.
-
In the Edit component pane, select GAS_150 and GAS_150B in the Applicable Gaskets list.
-
Select BLT_150A and BLT_150B in the Applicable Bolts list.
-
Click Apply.
-
Click FLG WELD NECK, 150LB, SCH XS, ASTM A105 Part C.
-
In the Edit component pane, type GAS_150, GAS_150A, and GAS_150B in the Applicable Gaskets list.
-
Then, type BLT_150, BLT_150A, and BLT_150B in the Applicable Bolts list.
The Applicable Gaskets and Applicable Bolts boxes populate.
-
Click Apply.
-
Click File > Save.