The StructMfgTemplateProcessAndMarking_Profile.xls workbook defines the process and marking definition rules and symbol parameters related to profile face templates. The workbook is delivered to the [Product Folder]\ShipCatalogData\BulkLoad\DataFiles\StructManufacturing folder and is bulkloaded into the Catalog.
Definition Section
PartClassType
Class type SmartOccurrence defined on the PartClassTypes sheet of [Product Folder]\ShipCatalogData\BulkLoad\DataFiles\AllShipCodeLists.xls. Do not modify.
Name
Name of the smart class as it appears in the Catalog task.
SelectionRule
ProgID of the smart occurrence rule used by the smart class.
SCType
Code list value for the smart class type defined internally by the software. Do not modify.
SCSubType
Code list value for the smart class subtype defined internally by the software. Do not modify.
oa:[parameter name]
Occurrence attribute that places the named catalog attribute on the bracket Parameters tab on the Properties dialog box. The parameter also appears in the Head section.
Head Section
Name
Name of the object as it appears in the Catalog task.
SymbolDefinition
2D symbol file associated with the smart item. Parameters correspond to symbol parameters in this file.
Definition
ProgID of a definition class module within the smart occurrence rules.
ParameterRule
ProgID of a parameter class module within the smart occurrence rules.
TemplateProcessProfile Sheet
Side
The side value passed in to the symbol. This is the side on which the template set is applied.
Type
The type value passed in to the symbol. Types include frame, centerline, perpendicular, perpendicularXY, and stern/stem.
MinHeight
The minimum height of the template.
MaxHeight
The maximum height of the template.
Orientation
The orientation value passed in to the symbol. Orientations include along frame, perpendicular, and normal to the base frame.
Direction
The direction value passed in to the symbol.
Position
Positions at which templates are to be placed. It could be at Frames, at Even Distance, or at Edges.
Extension
Value and method of extension. It can be Fixed Value or Offset based (Case1 and 2 below).
BasePlane
The base plane value passed in to the symbol. The base plane is normal to the profile.
TemplateService
The template service value passed in to the symbol.
UserDefinedValues
Provides customization of various data used in service. An example is whether to apply a margin.
TemplateNaming
Provides the Template Naming Rule.
TemplateMarkingProfile Sheet
The following parameters are set to use fixed values, rule-based values, or to be ignored:
SideMark
For future use.
SeamMarks
Creates marks at seam locations at both ends of each template.
BaseCtlLineMark
Creates a mark at the intersection of the template with the base control line.
SightLineMark
Creates a mark on the top line of the template at some distance from the top base control line.
ShipDirectionMark
Creates a mark indicating the ship direction.
LabelMark
For future use.
FrameMarks
Creates marks of intersecting frames.
KnuckleMarks
Creates marks of intersecting knuckles with the template bottom line.
ReferenceMarks
Creates marks of intersecting reference curves with the template bottom line.
TemplateMarks
Creates marks of intersecting templates with the template.
CustomMarks
Creates any other marks based on rule.