Toolbar:
Specifies the parameters for the leg.
This component cannot be created by itself and must be attached to one of the following components:
Description
Specifies an alphanumeric description for the component. This description is visible even when the component is collapsed in the grid.
Distance
Specifies the distance from the bottom of the component to which this component is attached.
Number of Legs
Specifies the number of legs.
Leg Length
Specifies the distance from the starting point to the ending point of the component.
Member Offset
Specifies the leg offset from the member.
Rotation Angle
Specifies the overall rotation angle applied to all the legs relative to the component to which the legs are attached.
Member Size
Displays the Select Steel Member dialog box so that you can select the section to use to build the legs. See Select Steel Member Dialog Box for more information.
Member Rotation Angle
Specifies the rotation angle applied to each member of the leg.
Baseplates
Indicates whether baseplates should be created.
Baseplate Offset
Specifies the baseplate offset.
Baseplate Length
Specifies the distance from the starting point to the ending point of the component.
Baseplate Width
Specifies the component width.
Baseplate Thickness
Specifies the component thickness.
Baseplate Rotation Angle
Specifies the baseplate rotation angle.
Material
Displays the Select Item dialog box, which lets you select the material from the list. For more information, see Select Item Dialog Box. The Select Item dialog box uses the file specified by the MaterialFile configuration file variable. For more information, see MaterialFile.