Connects the leader line to either the left-most or right-most point of the weld line, depending on the orientation of the label.
The following image shows the leader line connecting to the left-most point of the weld line.
1 - Leader line |
Customization
breakline
Controls whether or not a breakline appears for the label. The breakline normally connects the leader line to the label.
Type -1 to place a leader jog.
Type 0 to omit the leader jog.
style
Defines the appearance of a leader line.
Specify any of the following styles.
-
ANSI: Applies a thin, solid, dark cyan line style with a filled arrow terminator to the leader line.
-
ANSI_FRACTIONAL: Applies a thick, solid, dark cyan line style with a filled arrow terminator to the leader line.
-
ANSI_NOARROW: Applies a thick, solid, dark cyan line style with no terminator to the leader line.
-
JIS: Applies a thick, solid, dark cyan line style with a large, open arrow terminator to the leader line.
-
ISO: Applies a thick, solid, dark cyan line style with a large, filled arrow terminator to the leader line.
-
DIN: Applies a thick, solid, dark cyan line style with a large, filled arrow terminator to the leader line.
-
ASA: Applies a thick, solid, dark cyan line style with a filled arrow terminator to the leader line.
-
BSI: Applies a thick, solid, dark cyan line style with a large, filled arrow terminator to the leader line.