CADWorx Plant I tab: Palette > Discontinuity View
Palettes toolbar: Discontinuity View
Plant menu: Palettes > Discontinuity View
Command line: DISCONTINUITYVIEW
Checks for different types of modeling issues, such as disconnected, un-connected, overlapped, and not on line.
Refresh
Refreshes the data in the grid.
Show All Types
Displays all issues in the grid.
Show Disconnected Only
Displays only disconnected and un-connected issues in the grid.
Show Not On Line Only
Displays only not-on-line issues in the grid.
Show Overlap Only
Displays only overlap issues in the grid.
Tolerance Settings
Displays the tolerance settings.
Color Settings
Displays the color and Auto Refresh settings.
Remove Selected Overlaps
Deletes the selected overlaps from the model .DWG file.
Export to File
Exports all data from the palette to a Microsoft Excel (*.CSV) file
Help
Displays the help file.
Tolerance Min
Specifies the minimum connection tolerance. Two components that are separated by a distance greater than the minimum tolerance, but less than the maximum tolerance are considered disconnected.
Tolerance Max
Specifies the maximum connection tolerance. Two components that are separated by a distance greater than the maximum tolerance are considered un-connected.
Color Arrow
Specifies the color for arrows.
Color Text
Specifies the color for text.
Auto Refresh
Indicates whether the software automatically updates the grid when you open the drawing.
#
Displays a number from the palette that coincides with the highlighted number in the drawing. The arrow and text color setting is used for the graphics drawn in the model.
Line Number
Displays the line number of the component.
Type
Displays the discontinuity type for the component.
-
Disconnected
Displays components that are not connected within the minimum tolerance.
-
Un-connected
Displays components that are not connected with in the maximum tolerance.
-
Overlap
Displays components that are duplicated at the same location. The number in parenthesis (n) is the number of overlapping components at this location.
-
Not on line
Displays components that are not connected to the pipe centerline (typically OLET type components).
Gap
Displays the distance between the two components. This value is 0.0 for overlapping components.
Long Description
Displays the long description of the component.
Category
Displays the category of the component.
Component Type
Displays the command named used to draw the component.
(X,Y,Z)
Displays the global X-, Y-, Z-coordinates of the component center point.
-
Pressing CTRL or SHIFT while left-clicking lets you select multiple items from the list.
-
Left-click to zoom in to the location of the issue.
-
Right-click to change the view to the location of the issue without zooming.