Displays properties for manufacturing tabs. Plates might have sharp corners or bent edges that could become deformed during fabrication, erection or assembly. Manufacturing tabs are additional material around such areas.
The order in which the properties display in your view depends on your configuration.
Approval State
Specifies the status of the selected object or filter. Changing this property sets the Status. The display depends on your access level. You might be unable to change the status of the object. The list is defined by the ApprovalStatus codelist.
Smart 3Dx saves an object to the database when you change that object's status. Use Undo (CTRL + Z) to reverse the status change.
You can only edit or manipulate an object with a status of Working.
Bevel on Tab Contour
Specifies the bevel status on the outer contour created by the Manufacturing Tab command.
Ignore
The bevel is not applied.
Driven
The bevel is applied to the portion of the contour touching the driven edge.
Driving
The bevel is applied to the portion of the contour touching the driving edge.
Both
The bevel is applied to the portion of the contour touching either the driven or driving edges.
Bevel on Tab Mark
Specifies the bevel status on the marking between the plate and the tab.
Ignore
The bevel is not applied.
Apply
The bevel is applied along the marking.
Created by
Specifies the name of the person who created the object.
Date Created
Specifies the creation date of the object.
Date Last Modified
Specifies the date of the last modification to the object.
Hyperlink
Specifies the URL or local file path associated with the object. Click the hyperlink to open the page or object in your default browser. Point to the hyperlink to display the URL or path as a tooltip.
Description
Specifies the descriptive text associated with the hyperlink.
URL
Specifies the web address or local file name associated with the hyperlink. The URL must include the protocol, such as http: or https:, as well as the domain name. For example, https://hexagonppm.com/.
Last Modified by
Specifies the name of the person who last modified the object.
Name
Specifies the name of the selected object. If the name is too long to entirely display in the box, point to the box to display the complete name as a tool tip. If the name is not defined by a rule, User Defined displays. If this name is generated by a naming rule, Naming Rule displays. If you type a name in this box, Smart 3Dx automatically changes the naming rule to User Defined.