A new file format SICOM is created to export insulation specifications. A new spec type insulation format should be created, which must be different from piping specifications. It is differentiated from other specifications with the gtype INSU.
The following image shows the attributes and other details available in the Data Table Configuration section for PDMS/ E3D, which are extracted into the SICOM file.
The attribute, retrieval method and retrieval source is provided below:
Attribute |
Retrieval Method |
Retrieval Source |
---|---|---|
SPCOM |
BASE_COLUMN |
sh.spec_code |
PDMS_VERSION |
NONE |
PDMS Default |
FLUREF |
ATTR_STND_METHOD |
Get_PDMS_Zero_Val |
LINETYPE |
NONE |
PDMS Default |
BSPEC |
NONE |
PDMS Default |
RATI |
BASE_COLUMN |
m_pck_pdms_lookup.get_spec_rating(sh.spec_header_id) |
NOMREF |
ATTR_STND_METHOD |
Get_PDMS_Zero_Val |
BRREF |
ATTR_STND_METHOD |
Get_PDMS_Zero_Val |
REDREF |
ATTR_STND_METHOD |
Get_PDMS_Zero_Val |
DISC_TEXT |
NONE |
PDMS Default |
PDMS_TYPE |
ATTR_STND_METHOD |
Get_GTYPE |
PDMS_NAME |
BASE_COLUMN |
'*/'||i.ident_code |
PBOR0 |
ATTR_STND_METHOD |
Get_PBORE0 |
BDIAMETER |
ATTR_STND_METHOD |
Get_PBORE0 |
STYP |
ATTR_STND_METHOD |
Get_STYP |
SHOP |
ATTR_STND_METHOD |
PDMS Default |
CATREF |
ATTR_STND_METHOD |
Get_CATREF |
DETAIL |
BASE_COLUMN |
'/'||m_pck_pdms_lookup.Get_PDMS_SDTE(i.ident) |
MATXT |
BASE_COLUMN |
'/'||m_pck_pdms_lookup.Get_PDMS_MATTXT_XTEXT(i.ident,cc.commodity_id,'CODE')||'-M' |
CMPREF |
BASE_COLUMN |
m_pck_pdms_lookup.get_pdms_cmpref(i.ident,cc.commodity_id) |
BLTREF |
ATTR_STND_METHOD |
Get_PDMS_Zero_Val |
TMPREF |
ATTR_STND_METHOD |
Get_PDMS_Zero_Val |
PDAREF |
ATTR_STND_METHOD |
Get_PDMS_Zero_Val |
PRTREF |
ATTR_STND_METHOD |
Get_PDMS_Zero_Val |
TEMP |
BASE_COLUMN |
m_pck_pdms_lookup.get_pdms_temp_range(i.ident,cc.commodity_id) |
The following image provides a glimpse of the SICOM file format and how data is extracted.
It should not be part of any piping spec type.
If commodity codes are mapped to INSU in data table mappings, insulation specification is generated based on these mappings. Insulation specification format is generated with the sheet name as SICOM, which stands for spec for insulation components.