The following attributes define the Base Plate 1 and Bolt 1 attributes of a Base Support data driven assembly:
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsBasePlate1:: |
Specifies the part number or the part class of the base plate on Leg1. To select the part number using BasePlate1Rule, do not specify any value for this property. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. The pipe attachment is an optional part. If you do not require a pipe attachment, do not specify a value. |
IJUAhsBasePlate1Rl:: |
Specifies the hgrSupportRule that returns the plate part number. The hanger rule must be the name of an existing rule in the catalog. To select the part number using BasePlate1Part, do not specify any value for this property. |
|
IJUAhsBasePlate1Ang:: |
Specifies the angle at which the BasePlate1Part rotates about the port Z-axis. The plate is attached to the Z-axis. |
|
IJUAhsBasePlate1Off:: |
Specifies the distance by which the base plate must be offset from Leg1. |
1 - Center of base plate to center of vertical parts 2 - Edge of base plate to center of vertical parts |
IJUAhsBasePlate1OffDef:: |
Specifies how to measure the BasePlate1Offset. |
|
IJUAhsBeamClamp::BeamClampPart |
Specifies the part number or a part class for a BeamClamp that is used for the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. BeamClamp is an optional part. |
IJUAhsBeamClampRl::BeamClampRule |
Specifies the hgrSupportRule that returns the part number of BeamClamp. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsMulti1::Multi1Qty |
Specifies the quantity of BeamClamps. |
Refer to MultiLocate attributes in Common section for Multi1Qty, Multi1LocateBy and Multi1Location information. |
IJUAhsMulti1::Multi1LocateBy |
Specifies the location of BeamClamps. Each BeamClamp can be located in two ways: 1 - Relative to center of the group 2 – Relative to Edge. |
|
IJUAhsMulti1::Multi1Location |
Specifies the spacing of the location based on the LocateBy attribute. |
|
IJUAhsBolt1::Bolt1Part |
Specifies the part number or the part class of the bolts that are connected to BasePlate1. To select the part number using Bolt1Rule, do not specify any value for this property. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. The bolt attachment is an optional part. If you do not require a pipe attachment, do not specify a value. |
IJUAhsBolt1Rl::Bolt1Rule |
Specifies the hgrSupportRule that returns the plate part number. The hanger rule must be the name of an existing rule in the catalog. To select the part number using Bolt11Part, do not specify any value for this property. |
|
IJUAhsBolt1Qty:: |
Specifies the number of bolts to include for BasePlate1. |
|
IJUAhsIncludeAnchor:: |
Specifies whether to include the anchor bolts or not. |