Where applicable, each AText description includes its respective default value. If a default value is not specified, the AText is normally left blank.
For each AText, three options are available:
-
<Default> uses the default AText value.
-
<Suppress> suppresses the AText value.
-
<Edit value> modifies the AText value with the user-specified entry.
Field Fit Weld Callout
Plats a distinguishing message that points to a field fit weld. The default value is FFW.
AText ID: |
-221 |
? Value: |
None |
$ Supported: |
No |
Seal Weld Label
Indicates the weld type for seal welds on the isometric drawing. The default value is SEAL WELD.
AText ID: |
-425 |
? Value: |
None |
$ Supported: |
No |
Mitre Weld Label
Identifies mitre welds. The software edits the mitre angle into the text string at the ? position, which can be positioned anywhere in the string. The default value is MITRE ?.
AText ID: |
-457 |
? Value: |
Mitre Angle |
$ Supported: |
Yes |
Site Weld Label
Points to a site weld. The value must be defined.
AText ID: |
-498 |
? Value: |
None |
$ Supported: |
No |
Shop Text Weld Label
Point to a site weld or a field fit weld that requires a shop test weld be performed at the same location. Applies to welds with the symbol key WSST or WFST. The default value is SHOP TEST WELD.
AText ID: |
-499 |
? Value: |
None |
$ Supported: |
No |
Offshore Weld Label
Points to an offshore weld if user-specified.
AText ID: |
-501 |
? Value: |
None |
$ Supported: |
No |