Provides commands for manipulating views.
Change View
Set Home View (CTRL + SHIFT + HOME)
Previous View (CTRL + SHIFT + LEFT)
Next View (CTRL + SHIFT + RIGHT)
View Manipulation
Center View by Object (SHIFT + E)
Clipping
Clip By Volume Command (CTRL+B)
Clear Clipping Volume (CTRL + SHIFT + B)
Options
Magnifier (M) - Displays a magnified view of the model around your cursor location. Press M to close the magnifier, or move the cursor out of the magnifier.
Close Magnifier on select - Indicates whether the magnifier closes when you select an object.
Display Center of Gravity - Displays the center of gravity location as a symbol in the graphic view.
Standard Views
There are 14 standard views that you can select to change how you look at your model.
Press CTRL as you click the command to also Fit (F) the view.
Top (CTRL + SHIFT + 2)
Displays the model as if you were looking at it from above.
Front (CTRL + SHIFT + 1)
Displays the model as if you were looking at it from the front.
Right (CTRL + SHIFT + 4)
Displays the model as if you were looking at it from the right side.
Bottom (CTRL + SHIFT + 6)
Displays the model as if you were looking at it from below.
Back (CTRL + SHIFT+ 5)
Displays the model as if you were looking at it from the back.
Left (CTRL + SHIFT + 3)
Displays the model as if you were looking at it from the left.
Top Front Left
Displays an isometric view of the model as if you were looking at it from the upper left-front corner.
Top Front Right (CTRL + SHIFT + 7)
Displays an isometric view of the model as if you were looking at it from the upper right-front corner.
Top Back Left
Displays an isometric view of the model as if you were looking at it from the upper left-rear corner.
Top Back Right
Displays an isometric view of the model as if you were looking at it from the upper right-back corner.
Bottom Front Left
Displays an isometric view of the model as if you were looking at it from the lower left-front corner.
Bottom Front Right
Displays an isometric view of the model as if you were looking at it from the lower right-front corner.
Bottom Back Left
Displays an isometric view of the model as if you were looking at it from the lower left-back corner.
Bottom Back Right
Displays an isometric view of the model as if you were looking at it from the lower right-back corner.